Roofing · Hattiesburg, MS
How much does metal roof installation cost in Hattiesburg, MS? (2026)
In Hattiesburg, metal roof installation runs $12,750–$29,100, with most paying around $20,950 — about 3% below the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $20,950
- Typical cost
- $20,950
- Labor vs US
- −11%
- Climate
- Hot
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Hattiesburg
- $12,750 on the low end, $29,100 on the high — metal roof installation in Hattiesburg averages $20,950, about 3% below the national average.
- Local labor in Hattiesburg is −11% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Budget about $250 for the local Roofing permit; it's already included above.
- 40 to 70 years is the usual service life, so budget for the next one before it fails.
- Booking during Late spring to early fall (dry, 45–85°F) typically saves about 5–10% versus peak-season pricing.
What goes into the price in Hattiesburg
A typical Hattiesburg metal roof installation of $20,950 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Hattiesburg 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $5,000 – $11,550 |
| Labor & installationThe installation work itself — removal, setup and startup — is what your city's labor rate actually moves. | $7,500 – $17,300 |
| Permit & feesTypical local Roofing permit, scaled to this metro. | $250 |
| Total installed cost | $12,750 – $29,100 |
Split from the Hattiesburg estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Hattiesburg
- Expect labor here to run 11% below the national norm (based on price levels for the Hattiesburg metro area) — that's what lowers the total.
- The hot climate in Hattiesburg adds roughly 3% to typical metal roof installation pricing versus a neutral climate.
- A Roofing permit in Hattiesburg costs around $250, included above.
Metal Roof Installation cost by roof size in Hattiesburg
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Hattiesburg 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $7,950 – $15,650 |
| 1,500 sq ft (15 squares) | $10,850 – $22,400 |
| 2,000 sq ft (20 squares) | $12,750 – $29,100 |
| 2,500 sq ft (25 squares) | $15,650 – $34,900 |
| 3,000+ sq ft (30 squares) | $18,550 – $40,650 |
National size ranges localized to Hattiesburg labor and climate.
Metal Roof Installation cost by type in Hattiesburg
| Corrugated steel (exposed fastener) | $8,850 – $17,500 |
| Standing-seam steel | $17,500 – $33,800 |
| Aluminum | $13,650 – $27,050 |
| Copper | $29,000 – $57,700 |
| Zinc | $27,050 – $52,950 |
Adjusted to Hattiesburg from national type-level ranges.
Metal Roof Installation cost by efficiency in Hattiesburg
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $7,950 – $17,550 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $12,750 – $29,100 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $24,300 – $48,350 |
Labor vs. materials in Hattiesburg
Install crew, removal, permit & startup — the part Hattiesburg rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $20,950 Hattiesburg project; your mix varies with scope.
How we estimate it
| National range | $13,000 – $30,000 |
| Hattiesburg labor adjustment | ×0.93 |
| hot climate factor | ×1.03 |
| Local permit | +$250 |
| Hattiesburg estimate | $12,750 – $29,100 |
Promo prices vs. the real cost
A headline roofing price means little without a defined scope — these are the numbers marketing tends to lean on:
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
These hit some bids and skip others. The deciding factors are your home's condition, layout and what the crew finds once work begins.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Tear-off of the old roof
- Labor, cleanup and permit
- Underlayment, fasteners and trim
What affects the cost
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
- Panel type (exposed-fastener vs standing seam)
- Whether existing roof can be overlaid
Ways to save on metal roof installation in Hattiesburg
- Compare lifetime cost, not just the install price
- Metal's 40–70 yr life lowers lifetime cost
- Some insurers discount metal and impact-rated roofs
- Steel standing seam balances cost and longevity
How long does metal roof installation last in Hattiesburg?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Hattiesburg
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Hattiesburg?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Hattiesburg, MS
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Hattiesburg, MS labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,500–$11,150 | $300/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,450–$14,900 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $16,750–$29,750 | $400/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $18,600–$37,200 | $450/yr |
Per-square ranges are national installed benchmarks localized to Hattiesburg, MS labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Hattiesburg
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why metal roof installation quotes vary — and how to compare them fairly
When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.
Why a quote looks high (or low)
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Compare the workmanship warranty, not just the material warranty.
- Verify the contractor is licensed, insured and local, with recent references.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Hattiesburg Roofing pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Hattiesburg
How much does metal roof installation cost in Hattiesburg, MS?
The low end sits near $12,750 and the high end near $29,100 for metal roof installation in Hattiesburg this 2026, with $20,950 the common middle. The figure is adjusted for local labor rates, hot-climate factors and permit fees.
Is metal roof installation more expensive in Hattiesburg than average?
Yes — Hattiesburg is about 3% lower than the national average, largely a function of local labor pricing at 0.93× the US average. (a local Roofing permit tacks on about $250).
Do I need a permit for metal roof installation in Hattiesburg?
In Hattiesburg, this usually needs a Roofing permit (around $250). The estimate above already accounts for it.
What affects metal roof installation cost the most?
Start with the fundamentals — installing a metal roof — higher upfront cost, long lifespan and strong durability. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the hot climate zone.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Hattiesburg using the BEA Regional Price Parity labor index (×0.93 here), the IECC hot-climate factor (×1.03) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Hattiesburg metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Hattiesburg
Homeowners in Hattiesburg often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Hattiesburg
Browse local 2026 costs for every home project in Hattiesburg, MS.