Roofing · Farmington Hills, MI
How much does metal roof installation cost in Farmington Hills, MI? (2026)
In Farmington Hills, metal roof installation runs $14,050–$32,050, with most paying around $23,050 — about 7% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $23,050
- Typical cost
- $23,050
- Labor vs US
- −4%
- Climate
- Cold
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Farmington Hills
- Expect $14,050 to $32,050 for metal roof installation in Farmington Hills; most quotes cluster near $23,050, about 7% above the national average.
- Local labor in Farmington Hills is −4% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Budget about $275 for the local Roofing permit; it's already included above.
- Schedule the replacement early — this typically holds up 40–70 years, and an emergency swap costs full price.
- Roughly 5–10% comes off when you book in Late spring to early fall (dry, 45–85°F) instead of peak season.
What goes into the price in Farmington Hills
A typical Farmington Hills metal roof installation of $23,050 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Farmington Hills 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $5,500 – $12,700 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $8,275 – $19,075 |
| Permit & feesTypical local Roofing permit, scaled to this metro. | $275 |
| Total installed cost | $14,050 – $32,050 |
Split from the Farmington Hills estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Farmington Hills
- Expect labor here to run 4% below the national norm (based on price levels for the Detroit-Warren-Dearborn metro area) — that's what lowers the total.
- Farmington Hills's cold climate increases typical metal roof installation cost by about 4% versus a neutral climate.
- Farmington Hills's Roofing permit runs roughly $275, which is already part of the number above.
Metal Roof Installation cost by roof size in Farmington Hills
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Farmington Hills 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,750 – $17,200 |
| 1,500 sq ft (15 squares) | $11,900 – $24,650 |
| 2,000 sq ft (20 squares) | $14,050 – $32,050 |
| 2,500 sq ft (25 squares) | $17,200 – $38,400 |
| 3,000+ sq ft (30 squares) | $20,400 – $44,750 |
National size ranges localized to Farmington Hills labor and climate.
Metal Roof Installation cost by type in Farmington Hills
| Corrugated steel (exposed fastener) | $9,800 – $19,350 |
| Standing-seam steel | $19,350 – $37,400 |
| Aluminum | $15,150 – $30,000 |
| Copper | $32,100 – $63,900 |
| Zinc | $30,000 – $58,600 |
Adjusted to Farmington Hills from national type-level ranges.
Metal Roof Installation cost by efficiency in Farmington Hills
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,750 – $19,350 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $14,050 – $32,050 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $26,750 – $53,200 |
Labor vs. materials in Farmington Hills
Install crew, removal, permit & startup — the part Farmington Hills rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $23,050 Farmington Hills project; your mix varies with scope.
Skilled installers in the Detroit-Warren-Dearborn area earn about $32.1/hr (3% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Farmington Hills labor adjustment | ×1.02 |
| cold climate factor | ×1.04 |
| Local permit | +$275 |
| Farmington Hills estimate | $14,050 – $32,050 |
Promo prices vs. the real cost
A low per-square roofing number in an ad means little until you know what scope it covers. Set these marketing figures against the real estimate above:
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Tear-off of the old roof
- Metal panels or standing-seam system
- Labor, cleanup and permit
- Underlayment, fasteners and trim
What affects the cost
- Roof complexity and number of penetrations
- Whether existing roof can be overlaid
- Panel type (exposed-fastener vs standing seam)
- Metal: steel, aluminum, copper or zinc
Ways to save on metal roof installation in Farmington Hills
- Some insurers discount metal and impact-rated roofs
- Steel standing seam balances cost and longevity
- Compare lifetime cost, not just the install price
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Farmington Hills?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Farmington Hills
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Farmington Hills?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Farmington Hills, MI
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Farmington Hills, MI labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,150–$12,250 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,150–$16,300 | $500/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $18,350–$32,650 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $20,400–$40,800 | $500/yr |
Per-square ranges are national installed benchmarks localized to Farmington Hills, MI labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Farmington Hills
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Why metal roof installation quotes vary — and how to compare them fairly
Two contractors can price the same job thousands apart. Almost always it's the scope each assumed — here's what drives the gap and how to close it.
Why a quote looks high (or low)
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Compare the workmanship warranty, not just the material warranty.
- Specify tear-off vs. overlay so all bids match.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Ask how deck/sheathing repairs are priced if rot is found.
Questions to ask Farmington Hills Roofing pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Farmington Hills
How much does metal roof installation cost in Farmington Hills, MI?
Expect to pay $14,050 to $32,050 for metal roof installation in Farmington Hills in 2026 — most quotes cluster around $23,050. We localize this using Farmington Hills's labor rates, cold-climate adjustments and permit fees — no separate math needed.
Is metal roof installation more expensive in Farmington Hills than average?
Why the gap? Farmington Hills prices about 7% higher than the national average, and local labor — indexed at 1.02 against the US average — does most of the work. (a local Roofing permit tacks on about $275).
Do I need a permit for metal roof installation in Farmington Hills?
The estimate above already covers the Roofing permit Farmington Hills generally requires for this job, so the $275 or so it costs won't land as a surprise.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. What moves the price most: equipment or material grade, your home's size and complexity, local labor rates, and the cold climate zone.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Farmington Hills using the BLS metro wage data labor index (×1.02 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Farmington Hills metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Farmington Hills
Homeowners in Farmington Hills often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Farmington Hills
Browse local 2026 costs for every home project in Farmington Hills, MI.