Roofing · Camden, NJ
How much does metal roof installation cost in Camden, NJ? (2026)
In Camden, metal roof installation runs $13,850–$31,550, with most paying around $22,700 — about 6% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $22,700
- Typical cost
- $22,700
- Labor vs US
- +1%
- Climate
- Mixed
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Camden
- A metal roof installation in Camden typically runs $13,850–$31,550, with most homeowners paying about $22,700 — about 6% above the national average.
- Local labor in Camden is +1% relative to the national average, which is what pushes this estimate away from the countrywide number.
- The estimate already covers the Roofing permit — roughly $275 in Camden.
- Service life runs 40–70 years on average; replacing on your schedule beats replacing on an emergency one.
- Roughly 5–10% comes off when you book in Late spring to early fall (dry, 45–85°F) instead of peak season.
What goes into the price in Camden
A typical Camden metal roof installation of $22,700 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Camden 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $5,450 – $12,500 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $8,125 – $18,775 |
| Permit & feesTypical local Roofing permit, scaled to this metro. | $275 |
| Total installed cost | $13,850 – $31,550 |
Split from the Camden estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Camden
- Expect labor here to run 1% above the national norm (based on price levels for the Philadelphia-Camden-Wilmington metro area) — that's what raises the total.
- A Roofing permit in Camden costs around $275, included above.
Metal Roof Installation cost by roof size in Camden
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Camden 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,600 – $16,950 |
| 1,500 sq ft (15 squares) | $11,750 – $24,250 |
| 2,000 sq ft (20 squares) | $13,850 – $31,550 |
| 2,500 sq ft (25 squares) | $16,950 – $37,850 |
| 3,000+ sq ft (30 squares) | $20,100 – $44,100 |
National size ranges localized to Camden labor and climate.
Metal Roof Installation cost by type in Camden
| Corrugated steel (exposed fastener) | $9,650 – $19,000 |
| Standing-seam steel | $19,000 – $36,700 |
| Aluminum | $14,850 – $29,400 |
| Copper | $31,500 – $62,700 |
| Zinc | $29,400 – $57,500 |
Adjusted to Camden from national type-level ranges.
Metal Roof Installation cost by efficiency in Camden
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,600 – $19,050 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,850 – $31,550 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $26,350 – $52,450 |
Labor vs. materials in Camden
Install crew, removal, permit & startup — the part Camden rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $22,700 Camden project; your mix varies with scope.
Skilled installers in the Philadelphia-Camden-Wilmington area earn about $33.4/hr (7% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Camden labor adjustment | ×1.04 |
| mixed climate factor | ×1 |
| Local permit | +$275 |
| Camden estimate | $13,850 – $31,550 |
Promo prices vs. the real cost
Roofing promotions spike after bad weather, and so does the gap between advertised and actual cost. Confirm scope first:
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
Only a handful of these will touch your total. Which ones depend on what's already in place and how the crew has to reach it.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Underlayment, fasteners and trim
- Metal panels or standing-seam system
- Tear-off of the old roof
- Labor, cleanup and permit
What affects the cost
- Panel type (exposed-fastener vs standing seam)
- Roof complexity and number of penetrations
- Whether existing roof can be overlaid
- Metal: steel, aluminum, copper or zinc
Ways to save on metal roof installation in Camden
- Compare lifetime cost, not just the install price
- Steel standing seam balances cost and longevity
- Metal's 40–70 yr life lowers lifetime cost
- Some insurers discount metal and impact-rated roofs
How long does metal roof installation last in Camden?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Camden
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Camden?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Camden, NJ
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Camden, NJ labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,300–$12,500 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,300–$16,650 | $500/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $18,700–$33,300 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $20,800–$41,600 | $500/yr |
Per-square ranges are national installed benchmarks localized to Camden, NJ labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Camden
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Why metal roof installation quotes vary — and how to compare them fairly
When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.
Why a quote looks high (or low)
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Compare the workmanship warranty, not just the material warranty.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Camden Roofing pros
Before you pick, make each contractor answer the same things — gaps in their replies tell you as much as the price.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Camden
How much does metal roof installation cost in Camden, NJ?
Expect to pay $13,850 to $31,550 for metal roof installation in Camden in 2026 — most quotes cluster around $22,700. We localize this using Camden's labor rates, mixed-climate adjustments and permit fees — no separate math needed.
Is metal roof installation more expensive in Camden than average?
Camden comes in about 6% higher than the national average. The main reason is labor: it indexes at 1.04 relative to the national average., plus a local Roofing permit running about $275.
Do I need a permit for metal roof installation in Camden?
Expect to pull a Roofing permit in Camden — about $275 — which is already built into the estimate above, not an extra charge.
What affects metal roof installation cost the most?
Worth knowing first: installing a metal roof — higher upfront cost, long lifespan and strong durability. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the mixed climate zone.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Camden using the BLS metro wage data labor index (×1.04 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Camden metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Camden
Homeowners in Camden often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Camden
Browse local 2026 costs for every home project in Camden, NJ.