Metal Roof Installation cost in Alabama (2026)
Across Alabama, metal roof installation varies by your city's labor rates, climate and permit fees. Select your city below for a localized estimate.
metal roof installation typically falls in this range across 12 Alabama cities — your exact estimate depends on local rates.
| City | Typical 2026 range |
|---|---|
| Birmingham, AL | $12,900 – $29,500 |
| Montgomery, AL | $12,850 – $29,300 |
| Mobile, AL | $12,700 – $28,950 |
| Huntsville, AL | $13,100 – $29,850 |
| Tuscaloosa, AL | $12,600 – $28,750 |
| Hoover, AL | $12,900 – $29,500 |
| Dothan, AL | $12,450 – $28,350 |
| Auburn, AL | $12,700 – $28,950 |
| Decatur, AL | $12,600 – $28,750 |
| Madison, AL | $13,100 – $29,850 |
| Florence, AL | $12,350 – $28,150 |
| Phenix City, AL | $12,700 – $28,950 |
Metal Roof Installation cost by type in Alabama
Typical 2026 ranges, localized to Alabama labor, climate and permits.
| Type | Alabama 2026 range |
|---|---|
| Corrugated steel (exposed fastener) | $9,000 – $17,800 |
| Standing-seam steel | $17,800 – $34,350 |
| Aluminum | $13,900 – $27,550 |
| Copper | $29,500 – $58,700 |
| Zinc | $27,550 – $53,850 |
Cheapest time for metal roof installation in Alabama
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Cost calculator
Roof cost by material in Alabama
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Alabama labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,650–$11,400 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,600–$15,200 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,100–$30,400 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,000–$38,000 | $450/yr |
Per-square ranges are national installed benchmarks localized to Alabama labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Metal Roof Installation in Alabama
How much does metal roof installation cost in Alabama?
Across Alabama, metal roof installation typically runs $12,350–$29,850 in 2026, depending on your city's labor rates, climate and permit fees. Florence is the most affordable (around $20,250) and Madison the most expensive (around $21,500).
Which Alabama city is cheapest for metal roof installation?
Florence has the lowest typical metal roof installation cost in Alabama at about $20,250, while Madison is the highest at about $21,500 — a gap driven mostly by local labor rates.
How do other Roofing options compare in Alabama?
In Birmingham, Alabama's largest market, metal roof installation typically runs $12,900–$29,500. For comparison, asphalt shingle roof replacement runs $5,750–$11,850, tile roof installation runs $10,700–$25,100, flat roof replacement runs $5,050–$14,700. Each option has its own Alabama cost guide with city-by-city pricing.
Why does metal roof installation cost vary across Alabama?
The three levers are local labor rates, climate zone and permit fees. In this hot, high-UV region, heat and sun resistance drive metal roof installation value, so reflective or light-coloured materials and strong ventilation reduce attic heat and extend roof life. Reflective or light-coloured materials plus strong attic ventilation extend roof life meaningfully in this climate.
When is the cheapest time to replace in Alabama?
The best window is late spring to early fall (dry, 45–85°f), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The priciest time is an emergency job during mid-winter and the post-storm rush.
Does Alabama require a permit for metal roof installation?
Most Alabama cities require a permit for metal roof installation; it typically adds around $250 and is already included in the estimates above.
Other Roofing projects in Alabama
Weighing your options? Typical 2026 ranges below are localized to Birmingham, Alabama's largest market — open any project for the full statewide breakdown.