Spray Foam Insulation cost in Utah (2026)
Across Utah, spray foam insulation varies by your city's labor rates, climate and permit fees. Select your city below for a localized estimate.
spray foam insulation typically falls in this range across 19 Utah cities — your exact estimate depends on local rates.
| City | Typical 2026 range |
|---|---|
| Salt Lake City, UT | $1,550 – $6,250 |
| West Valley City, UT | $1,550 – $6,250 |
| Provo, UT | $1,550 – $6,200 |
| West Jordan, UT | $1,550 – $6,250 |
| Orem, UT | $1,550 – $6,200 |
| Sandy, UT | $1,550 – $6,250 |
| Ogden, UT | $1,550 – $6,200 |
| St. George, UT | $1,550 – $6,200 |
| Layton, UT | $1,550 – $6,200 |
| Taylorsville, UT | $1,550 – $6,250 |
| South Jordan, UT | $1,550 – $6,250 |
| Lehi, UT | $1,550 – $6,200 |
| Logan, UT | $1,550 – $6,100 |
| Murray, UT | $1,550 – $6,250 |
| Draper, UT | $1,550 – $6,200 |
| Bountiful, UT | $1,550 – $6,250 |
| Riverton, UT | $1,550 – $6,200 |
| Roy, UT | $1,550 – $6,200 |
| Spanish Fork, UT | $1,550 – $6,200 |
Spray Foam Insulation cost by type in Utah
Typical 2026 ranges, localized to Utah labor, climate and permits.
| Type | Utah 2026 range |
|---|---|
| Open-cell | $1,550 – $4,700 |
| Closed-cell | $2,600 – $7,300 |
Cheapest time for spray foam insulation in Utah
Everyone insulates in fall before winter, so that's the busy, full-price season. Booking in spring or summer catches off-peak pricing — and utility rebate budgets are often freshest early in the year.
Climate-zone spec
How much insulation Utah actually needs
Utah sits in a cold climate. DOE and ENERGY STAR recommend these insulation R-values (higher R = more resistance to heat flow):
Cold climates need the most attic insulation — DOE recommends R-49 to R-60. Heat rises and escapes through the attic first, so this is where each dollar saves the most on heating.
Recommendations from ENERGY STAR / DOE Recommended Insulation R-values. Costadia groups cities into cold / mixed / hot bands — confirm your exact zone with the ENERGY STAR / DOE Recommended Insulation R-values. Source.
Rebates & incentives
Insulation and air-sealing lost their federal tax credit in 2026, but rebates and free-weatherization programs still cut the cost — especially for lower-income households.
- The federal 25C tax credit (which covered up to $1,200/yr of insulation and air-sealing) ended December 31, 2025 under the One Big Beautiful Bill Act — not available for 2026.
- IRA Home Electrification & Appliance Rebates (HEAR): up to $1,600 toward insulation, air-sealing and ventilation for households under 150% of area median income, where the state program has launched.
- IRA HOMES rebates: up to $8,000 for whole-home efficiency retrofits that hit modeled energy-savings targets.
- Weatherization Assistance Program (WAP): free insulation and air-sealing for households at or below 200% of the federal poverty level.
- Many gas and electric utilities offer their own insulation rebates — check the DSIRE database and your provider.
Verified July 2026. Program budgets and windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database. Costadia does not administer these programs.
Spray Foam Insulation in Utah
How much does spray foam insulation cost in Utah?
Across Utah, spray foam insulation typically runs $1,550–$6,250 in 2026, depending on your city's labor rates, climate and permit fees. Logan is the most affordable (around $3,850) and Spanish Fork the most expensive (around $3,900).
Which Utah city is cheapest for spray foam insulation?
Logan has the lowest typical spray foam insulation cost in Utah at about $3,850, while Spanish Fork is the highest at about $3,900 — a gap driven mostly by local labor rates.
How do other Insulation options compare in Utah?
In Salt Lake City, Utah's largest market, spray foam insulation typically runs $1,550–$6,250. For comparison, attic insulation runs $1,600–$6,350. Each option has its own Utah cost guide with city-by-city pricing.
Why does spray foam insulation cost vary across Utah?
The three levers are local labor rates, climate zone and permit fees. In this cold-climate region, high R-value matters most, since more insulation pays back fastest through winter heating savings, making spray foam insulation a top-ROI upgrade. Aim for the top of the DOE-recommended R-value range for this zone, not the minimum.
When is the cheapest time to replace in Utah?
The best window is spring and summer, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The priciest time is an emergency job during the pre-winter fall rush.
Does Utah require a permit for spray foam insulation?
Permit requirements vary by city in Utah; where one is required, the fee is included in the estimates above.
Other Insulation projects in Utah
Weighing your options? Typical 2026 ranges below are localized to Salt Lake City, Utah's largest market — open any project for the full statewide breakdown.