Tile Flooring Installation cost in North Dakota (2026)
Across North Dakota, tile flooring installation varies by your city's labor rates, climate and permit fees. Select your city below for a localized estimate.
tile flooring installation typically falls in this range across 4 North Dakota cities — your exact estimate depends on local rates.
| City | Typical 2026 range |
|---|---|
| Fargo, ND | $3,250 – $11,150 |
| Bismarck, ND | $3,300 – $11,350 |
| Grand Forks, ND | $3,250 – $11,050 |
| Minot, ND | $3,300 – $11,300 |
Tile Flooring Installation cost by type in North Dakota
Typical 2026 ranges, localized to North Dakota labor, climate and permits.
| Type | North Dakota 2026 range |
|---|---|
| Ceramic | $3,250 – $7,400 |
| Porcelain | $4,200 – $9,300 |
| Natural stone (travertine / slate) | $5,550 – $13,000 |
| Marble | $7,400 – $16,700 |
Cheapest time for tile flooring installation in North Dakota
Flooring demand dips after the holidays, and retailers clear inventory with January sales — a strong window for both material deals and installer availability.
Cost calculator
North Dakotacost by material & area
Installed price per square foot by material, localized to North Dakota. Enter your area for a total (includes a 10% waste allowance).
| Material | Installed / sq ft | Total (300 sq ft) |
|---|---|---|
Ceramic tile Most budget-friendly; good for low-moisture rooms. | $9.3–$14.9 | $3,075–$4,900 |
Porcelain tile Denser and more water-resistant than ceramic — best for baths, entries. | $11.2–$18.6 | $3,675–$6,150 |
Natural stone (travertine, slate, marble) Premium look; needs sealing and heavier substrate prep. | $14.0–$27.9 | $4,600–$9,200 |
Order 5–15% extra for cuts and waste (NWFA guidance) — more for diagonal or herringbone layouts. Per-sq-ft ranges are national installed benchmarks localized to North Dakota via local labor rates — a research estimate, not a quote.
Tile Flooring Installation in North Dakota
How much does tile flooring installation cost in North Dakota?
Across North Dakota, tile flooring installation typically runs $3,250–$11,350 in 2026, depending on your city's labor rates, climate and permit fees. Grand Forks is the most affordable (around $7,150) and Bismarck the most expensive (around $7,350).
Which North Dakota city is cheapest for tile flooring installation?
Grand Forks has the lowest typical tile flooring installation cost in North Dakota at about $7,150, while Bismarck is the highest at about $7,350 — a gap driven mostly by local labor rates.
How do other Flooring options compare in North Dakota?
In Fargo, North Dakota's largest market, tile flooring installation typically runs $3,250–$11,150. For comparison, hardwood flooring installation runs $5,550–$13,900, laminate flooring installation runs $1,850–$6,500. Each option has its own North Dakota cost guide with city-by-city pricing.
Why does tile flooring installation cost vary across North Dakota?
The three levers are local labor rates, climate zone and permit fees. In cold regions with dry winter air, solid wood can shrink and gap, so acclimating the material and controlling humidity protects your tile flooring installation. Let the material acclimate fully before install, and consider a humidifier through the driest winter months.
When is the cheapest time to replace in North Dakota?
The best window is winter and the post-holiday january window, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The priciest time is an emergency job during late spring and summer.
Does North Dakota require a permit for tile flooring installation?
Permit requirements vary by city in North Dakota; where one is required, the fee is included in the estimates above.
Other Flooring projects in North Dakota
Weighing your options? Typical 2026 ranges below are localized to Fargo, North Dakota's largest market — open any project for the full statewide breakdown.