Tile Roof Installation cost: Salt Lake City vs Taylorsville (2026)
Tile roof installation costs about the same in Salt Lake City and Taylorsville in 2026 — roughly $17,700 in each.
Salt Lake City UT
Typically around $17,700
Taylorsville UT
Typically around $17,700
Salt Lake City vs Taylorsville: full breakdown
| Factor | Salt Lake City | Taylorsville |
|---|---|---|
| Typical 2026 cost | $17,700 | $17,700 |
| Estimated range | $10,550–$24,800 | $10,550–$24,800 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $10,600 | $10,600 |
| Materials/equipment | $7,100 | $7,100 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
Neither metro has a cost edge on tile roof installation — spend your decision-making energy on the contractor, not the location.
Tile roof installation by type: Salt Lake City vs Taylorsville
We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Salt Lake City | Taylorsville |
|---|---|---|
| Concrete tile | $10,550–$20,850 | $10,550–$20,850 |
| Clay / terracotta tile | $14,000–$27,750 | $14,000–$27,750 |
| Slate | $19,900–$49,300 | $19,900–$49,300 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Tile roof installation by roof size: Salt Lake City vs Taylorsville
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Salt Lake City | Taylorsville |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,150–$14,000 | $7,150–$14,000 |
| 1,500 sq ft (15 squares) | $9,100–$18,900 | $9,100–$18,900 |
| 2,000 sq ft (20 squares) | $10,550–$24,800 | $10,550–$24,800 |
| 2,500 sq ft (25 squares) | $13,050–$29,700 | $13,050–$29,700 |
| 3,000+ sq ft (30 squares) | $15,950–$35,600 | $15,950–$35,600 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Salt Lake City vs Taylorsville
Is tile roof installation cheaper in Salt Lake City or Taylorsville?
Practically identical — expect around $17,700 for tile roof installation whichever city you're in.
Why does tile roof installation cost more in Taylorsville than Salt Lake City?
It comes down to labor: Taylorsville indexes at 0.98 against Salt Lake City's 0.98. The cold-vs-cold climate difference adds to the gap.
How much is tile roof installation in Salt Lake City, UT?
Expect to pay $10,550 to $24,800 for tile roof installation in Salt Lake City in 2026, averaging around $17,700.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $30.1/hr in the Salt Lake City-Murray area versus $30.1/hr around Salt Lake City-Murray (BLS metro wage data). Since labor is roughly 60% of a tile roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy tile roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Salt Lake City and Taylorsville, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on tile roof installation cost?
There's no cost argument here between Salt Lake City and Taylorsville — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik