Tile Roof Installation cost: Ogden vs Salt Lake City (2026)
Ogden runs 1% lower than Salt Lake City for tile roof installation — expect around $17,500 in Ogden against $17,700 in Salt Lake City, a difference of about $200.
Ogden UT
Lower costTypically around $17,500
Salt Lake City UT
Typically around $17,700
Ogden vs Salt Lake City: full breakdown
| Factor | Ogden | Salt Lake City |
|---|---|---|
| Typical 2026 cost | $17,500 | $17,700 |
| Estimated range | $10,450–$24,550 | $10,550–$24,800 |
| Labor index (vs US) | ×0.97 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $10,500 | $10,600 |
| Materials/equipment | $7,000 | $7,100 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
1% is within noise for tile roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Tile roof installation by type: Ogden vs Salt Lake City
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Ogden | Salt Lake City |
|---|---|---|
| Concrete tile | $10,450–$20,650 | $10,550–$20,850 |
| Clay / terracotta tile | $13,850–$27,450 | $14,000–$27,750 |
| Slate | $19,700–$48,800 | $19,900–$49,300 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Tile roof installation by roof size: Ogden vs Salt Lake City
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Ogden | Salt Lake City |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,050–$13,850 | $7,150–$14,000 |
| 1,500 sq ft (15 squares) | $9,000–$18,700 | $9,100–$18,900 |
| 2,000 sq ft (20 squares) | $10,450–$24,550 | $10,550–$24,800 |
| 2,500 sq ft (25 squares) | $12,900–$29,400 | $13,050–$29,700 |
| 3,000+ sq ft (30 squares) | $15,800–$35,200 | $15,950–$35,600 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Ogden; we use Utah regional price parity instead.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Ogden vs Salt Lake City
Is tile roof installation cheaper in Ogden or Salt Lake City?
Ogden comes out ahead here, at roughly $17,500 for tile roof installation compared with $17,700 in Salt Lake City — a 1% ($200) gap as of 2026.
Why does tile roof installation cost more in Salt Lake City than Ogden?
It comes down to labor: Salt Lake City indexes at 0.98 against Ogden's 0.97. The cold-vs-cold climate difference adds to the gap.
How much is tile roof installation in Ogden, UT?
Expect to pay $10,450 to $24,550 for tile roof installation in Ogden in 2026, averaging around $17,500.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Ogden and Salt Lake City (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
That would be a stretch. $200 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Salt Lake City can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik