Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Millcreek vs Provo (2026)

Millcreek runs 1% higher than Provo for tile roof installation — expect around $17,700 in Millcreek against $17,500 in Provo, a difference of about $200.

Millcreek UT

$10,550 $24,800

Typically around $17,700

Provo UT

Lower cost
$10,450 $24,550

Typically around $17,500

Millcreek costs about $200 (1%) more than Provo for tile roof installation, largely because of the local labor rate gap.
Side by side

Millcreek vs Provo: full breakdown

FactorMillcreekProvo
Typical 2026 cost$17,700$17,500
Estimated range$10,550–$24,800$10,450–$24,550
Labor index (vs US)×0.98×0.97
Climate zoneColdCold
Climate factor×1×1
Local permit$275$275
Labor share$10,600$10,500
Materials/equipment$7,100$7,000

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

The verdict

Is the price difference a dealbreaker?

That 1% gap is small — for tile roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.

By type

Tile roof installation by type: Millcreek vs Provo

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeMillcreekProvo
Concrete tile$10,550$20,850$10,450$20,650
Clay / terracotta tile$14,000$27,750$13,850$27,450
Slate$19,900$49,300$19,700$48,800

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Tile roof installation by roof size: Millcreek vs Provo

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeMillcreekProvo
1,000 sq ft (10 squares)$7,150$14,000$7,050$13,850
1,500 sq ft (15 squares)$9,100$18,900$9,000$18,700
2,000 sq ft (20 squares)$10,550$24,800$10,450$24,550
2,500 sq ft (25 squares)$13,050$29,700$12,900$29,400
3,000+ sq ft (30 squares)$15,950$35,600$15,800$35,200

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.

Millcreek, UT
$30.1/hr

Salt Lake City-Murray metro · about 3% below the US average installer wage.

Provo, UT
Modeled from state data

No BLS metro wage series for Provo; we use Utah regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

Our take

A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.

FAQ

Millcreek vs Provo

Is tile roof installation cheaper in Millcreek or Provo?

Provo wins on price: tile roof installation runs about $17,500 there versus $17,700 in Millcreek, a gap of roughly $200 (1%) as of 2026.

Why does tile roof installation cost more in Millcreek than Provo?

Labor rates explain most of it — 0.98 in Millcreek vs 0.97 in Provo. A cold climate versus cold accounts for the rest.

How much is tile roof installation in Millcreek, UT?

tile roof installation in Millcreek runs $10,550–$24,800 as of 2026 — most jobs land near $17,700.

When is the cheapest time to buy tile roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Millcreek and Provo (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on tile roof installation cost?

That would be a stretch. $200 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Millcreek can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik