Tile Roof Installation cost: Maple Grove vs Minneapolis (2026)
There's essentially no price gap here: tile roof installation runs close to $19,950 in both Maple Grove and Minneapolis in 2026.
Maple Grove MN
Typically around $19,950
Minneapolis MN
Typically around $19,950
Maple Grove vs Minneapolis: full breakdown
| Factor | Maple Grove | Minneapolis |
|---|---|---|
| Typical 2026 cost | $19,950 | $19,950 |
| Estimated range | $11,900–$27,950 | $11,900–$27,950 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,950 | $11,950 |
| Materials/equipment | $8,000 | $8,000 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
No real cost edge either way
The two metros are effectively a wash for tile roof installation — pick on contractor quality and timing, not location.
Tile roof installation by type: Maple Grove vs Minneapolis
Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Maple Grove | Minneapolis |
|---|---|---|
| Concrete tile | $11,900–$23,550 | $11,900–$23,550 |
| Clay / terracotta tile | $15,800–$31,300 | $15,800–$31,300 |
| Slate | $22,450–$55,650 | $22,450–$55,650 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Tile roof installation by roof size: Maple Grove vs Minneapolis
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Maple Grove | Minneapolis |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,800 | $8,050–$15,800 |
| 1,500 sq ft (15 squares) | $10,250–$21,350 | $10,250–$21,350 |
| 2,000 sq ft (20 squares) | $11,900–$27,950 | $11,900–$27,950 |
| 2,500 sq ft (25 squares) | $14,700–$33,500 | $14,700–$33,500 |
| 3,000+ sq ft (30 squares) | $18,000–$40,150 | $18,000–$40,150 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Maple Grove vs Minneapolis
Is tile roof installation cheaper in Maple Grove or Minneapolis?
Practically identical — expect around $19,950 for tile roof installation whichever city you're in.
Why does tile roof installation cost more in Minneapolis than Maple Grove?
The main driver is local labor rates: Minneapolis's labor index is 1.11 versus 1.11 in Maple Grove. Climate zone (cold vs cold) also shift the total.
How much is tile roof installation in Maple Grove, MN?
Maple Grove homeowners can expect $11,900 to $27,950 for tile roof installation in 2026, with $19,950 the typical number.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $36.7/hr in the Minneapolis-St. Paul-Bloomington area versus $36.7/hr around Minneapolis-St. Paul-Bloomington (BLS metro wage data). Since labor is roughly 60% of a tile roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Maple Grove and Minneapolis: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
Cost shouldn't be the deciding factor between Maple Grove and Minneapolis — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik