Tile Roof Installation cost: Jacksonville vs The Acreage (2026)
The two metros aren't quite in sync on tile roof installation: Jacksonville sits 1% below The Acreage, or roughly $17,900 versus $18,150 — about $250 apart.
Jacksonville FL
Lower costTypically around $17,900
The Acreage FL
Typically around $18,150
Jacksonville vs The Acreage: full breakdown
| Factor | Jacksonville | The Acreage |
|---|---|---|
| Typical 2026 cost | $17,900 | $18,150 |
| Estimated range | $10,700–$25,100 | $10,850–$25,400 |
| Labor index (vs US) | ×0.94 | ×0.96 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.05 | ×1.05 |
| Local permit | $275 | $325 |
| Labor share | $10,750 | $10,900 |
| Materials/equipment | $7,150 | $7,250 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
How much should this gap actually matter?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for tile roof installation — focus on the contractor, not the city.
Tile roof installation by type: Jacksonville vs The Acreage
We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Jacksonville | The Acreage |
|---|---|---|
| Concrete tile | $10,700–$21,100 | $10,850–$21,400 |
| Clay / terracotta tile | $14,150–$28,050 | $14,350–$28,400 |
| Slate | $20,100–$49,900 | $20,400–$50,500 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Tile roof installation by roof size: Jacksonville vs The Acreage
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Jacksonville | The Acreage |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,200–$14,150 | $7,350–$14,350 |
| 1,500 sq ft (15 squares) | $9,200–$19,100 | $9,350–$19,400 |
| 2,000 sq ft (20 squares) | $10,700–$25,100 | $10,850–$25,400 |
| 2,500 sq ft (25 squares) | $13,150–$30,050 | $13,350–$30,450 |
| 3,000+ sq ft (30 squares) | $16,150–$36,000 | $16,400–$36,450 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Jacksonville metro · about 9% below the US average installer wage.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Jacksonville vs The Acreage
Is tile roof installation cheaper in Jacksonville or The Acreage?
Jacksonville wins on price: tile roof installation runs about $17,900 there versus $18,150 in The Acreage, a gap of roughly $250 (1%) as of 2026.
Why does tile roof installation cost more in The Acreage than Jacksonville?
Labor rates explain most of it — 0.96 in The Acreage vs 0.94 in Jacksonville. A hot climate versus hot, along with differing permit costs, accounts for the rest.
How much is tile roof installation in Jacksonville, FL?
tile roof installation in Jacksonville runs $10,700–$25,100 as of 2026 — most jobs land near $17,900.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $28.3/hr in the Jacksonville area and $28.8/hr in Miami-Fort Lauderdale-West Palm Beach. Given labor is around 60% of a tile roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Jacksonville and The Acreage: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
That would be a stretch. $250 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in The Acreage can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik