Tile Roof Installation cost: Franklin vs Memphis (2026)
The two metros aren't quite in sync on tile roof installation: Franklin sits 1% above Memphis, or roughly $17,450 versus $17,250 — about $200 apart.
Franklin TN
Typically around $17,450
Memphis TN
Lower costTypically around $17,250
Franklin vs Memphis: full breakdown
| Factor | Franklin | Memphis |
|---|---|---|
| Typical 2026 cost | $17,450 | $17,250 |
| Estimated range | $10,400–$24,450 | $10,300–$24,200 |
| Labor index (vs US) | ×0.97 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $250 |
| Labor share | $10,450 | $10,350 |
| Materials/equipment | $7,000 | $6,900 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
1% is within noise for tile roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Tile roof installation by type: Franklin vs Memphis
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Franklin | Memphis |
|---|---|---|
| Concrete tile | $10,400–$20,550 | $10,300–$20,400 |
| Clay / terracotta tile | $13,800–$27,350 | $13,650–$27,100 |
| Slate | $19,600–$48,600 | $19,400–$48,200 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
Tile roof installation by roof size: Franklin vs Memphis
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Franklin | Memphis |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,050–$13,800 | $6,950–$13,650 |
| 1,500 sq ft (15 squares) | $8,950–$18,650 | $8,900–$18,450 |
| 2,000 sq ft (20 squares) | $10,400–$24,450 | $10,300–$24,200 |
| 2,500 sq ft (25 squares) | $12,850–$29,250 | $12,700–$29,000 |
| 3,000+ sq ft (30 squares) | $15,750–$35,050 | $15,600–$34,750 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a tile roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Franklin vs Memphis
Is tile roof installation cheaper in Franklin or Memphis?
Yes — Franklin costs more. Expect around $17,450 for tile roof installation there against $17,250 in Memphis, about $200 (1%) apart in 2026.
Why does tile roof installation cost more in Franklin than Memphis?
Labor rates explain most of it — 0.97 in Franklin vs 0.96 in Memphis. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is tile roof installation in Franklin, TN?
tile roof installation in Franklin runs $10,400–$24,450 as of 2026 — most jobs land near $17,450.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $29.4/hr in Nashville-Davidson--Murfreesboro--Franklin compared with $29/hr in Memphis (BLS OEWS). Labor is about 60% of a tile roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Franklin and Memphis (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
Rarely. The $200 difference is real but one-time, and you can often close most of it in Franklin by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik