Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: El Dorado Hills vs Fresno (2026)

El Dorado Hills runs 2% higher than Fresno for tile roof installation — expect around $19,200 in El Dorado Hills against $18,800 in Fresno, a difference of about $400.

El Dorado Hills CA

$11,450 $26,900

Typically around $19,200

Fresno CA

Lower cost
$11,250 $26,350

Typically around $18,800

El Dorado Hills costs about $400 (2%) more than Fresno for tile roof installation, largely because of the local labor rate gap.
Side by side

El Dorado Hills vs Fresno: full breakdown

FactorEl Dorado HillsFresno
Typical 2026 cost$19,200$18,800
Estimated range$11,450–$26,900$11,250–$26,350
Labor index (vs US)×1.06×1.04
Climate zoneMixedMixed
Climate factor×1×1
Local permit$300$300
Labor share$11,500$11,300
Materials/equipment$7,700$7,500

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

The verdict

Is the gap worth worrying about?

At 2%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for tile roof installation — focus on the contractor, not the city.

By type

Tile roof installation by type: El Dorado Hills vs Fresno

We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeEl Dorado HillsFresno
Concrete tile$11,450$22,650$11,250$22,150
Clay / terracotta tile$15,200$30,100$14,900$29,450
Slate$21,600$53,500$21,150$52,350

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

By size

Tile roof installation by roof size: El Dorado Hills vs Fresno

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeEl Dorado HillsFresno
1,000 sq ft (10 squares)$7,750$15,200$7,600$14,900
1,500 sq ft (15 squares)$9,900$20,500$9,650$20,100
2,000 sq ft (20 squares)$11,450$26,900$11,250$26,350
2,500 sq ft (25 squares)$14,150$32,250$13,850$31,550
3,000+ sq ft (30 squares)$17,350$38,600$16,950$37,800

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

Local labor reality

What roofing pros earn in each metro

With labor making up about 60% of a tile roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.

El Dorado Hills, CA
$34.5/hr

Sacramento-Roseville-Folsom metro · about 11% above the US average installer wage.

Fresno, CA
$33.3/hr

Fresno metro · about 7% above the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

Our take

The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.

FAQ

El Dorado Hills vs Fresno

Is tile roof installation cheaper in El Dorado Hills or Fresno?

Yes — El Dorado Hills costs more. Expect around $19,200 for tile roof installation there against $18,800 in Fresno, about $400 (2%) apart in 2026.

Why does tile roof installation cost more in El Dorado Hills than Fresno?

It comes down to labor: El Dorado Hills indexes at 1.06 against Fresno's 1.04. The mixed-vs-mixed climate difference adds to the gap.

How much is tile roof installation in El Dorado Hills, CA?

In El Dorado Hills, tile roof installation typically runs $11,450–$26,900 in 2026, with most homeowners paying around $19,200.

Do roofing pros really charge more in one city?

Yes — and the wage data shows it. A skilled installer earns about $34.5/hr in the Sacramento-Roseville-Folsom area versus $33.3/hr around Fresno (BLS metro wage data). Since labor is roughly 60% of a tile roof installation job, that wage gap is the biggest reason the installed prices differ.

When is the cheapest time to buy tile roof installation — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both El Dorado Hills and Fresno, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on tile roof installation cost?

Probably not. Yes, $400 is a real gap, but it's a one-time cost you can partly offset in El Dorado Hills with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik