Tile Roof Installation cost: Cleveland vs Memphis (2026)
Budget-wise, tile roof installation in Cleveland ($16,850) runs 2% less than in Memphis ($17,250), a roughly $400 spread.
Cleveland TN
Lower costTypically around $16,850
Memphis TN
Typically around $17,250
Cleveland vs Memphis: full breakdown
| Factor | Cleveland | Memphis |
|---|---|---|
| Typical 2026 cost | $16,850 | $17,250 |
| Estimated range | $10,050–$23,600 | $10,300–$24,200 |
| Labor index (vs US) | ×0.93 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $10,100 | $10,350 |
| Materials/equipment | $6,750 | $6,900 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the price difference a dealbreaker?
That 2% gap is small — for tile roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Tile roof installation by type: Cleveland vs Memphis
Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Cleveland | Memphis |
|---|---|---|
| Concrete tile | $10,050–$19,850 | $10,300–$20,400 |
| Clay / terracotta tile | $13,350–$26,400 | $13,650–$27,100 |
| Slate | $18,950–$46,950 | $19,400–$48,200 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Tile roof installation by roof size: Cleveland vs Memphis
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Cleveland | Memphis |
|---|---|---|
| 1,000 sq ft (10 squares) | $6,800–$13,350 | $6,950–$13,650 |
| 1,500 sq ft (15 squares) | $8,650–$18,000 | $8,900–$18,450 |
| 2,000 sq ft (20 squares) | $10,050–$23,600 | $10,300–$24,200 |
| 2,500 sq ft (25 squares) | $12,400–$28,250 | $12,700–$29,000 |
| 3,000+ sq ft (30 squares) | $15,200–$33,850 | $15,600–$34,750 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Labor is about 60% of a tile roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Cleveland; we use Tennessee regional price parity instead.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Cleveland vs Memphis
Is tile roof installation cheaper in Cleveland or Memphis?
Cleveland wins on price: tile roof installation runs about $16,850 there versus $17,250 in Memphis, a gap of roughly $400 (2%) as of 2026.
Why does tile roof installation cost more in Memphis than Cleveland?
The main driver is local labor rates: Memphis's labor index is 0.96 versus 0.93 in Cleveland. Climate zone (mixed vs mixed) also shift the total.
How much is tile roof installation in Cleveland, TN?
Expect to pay $10,050 to $23,600 for tile roof installation in Cleveland in 2026, averaging around $16,850.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Cleveland and Memphis: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
Not really — the $400 gap is one-time, and smart timing and tighter quotes in Memphis can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik