Tile Roof Installation cost: Chicago vs Evanston (2026)
Tile roof installation costs about the same in Chicago and Evanston in 2026 — roughly $20,450 in each.
Chicago IL
Typically around $20,450
Evanston IL
Typically around $20,450
Chicago vs Evanston: full breakdown
| Factor | Chicago | Evanston |
|---|---|---|
| Typical 2026 cost | $20,450 | $20,450 |
| Estimated range | $12,200–$28,700 | $12,200–$28,700 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $12,250 | $12,250 |
| Materials/equipment | $8,200 | $8,200 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
This is a statistical tie on tile roof installation cost, so let contractor reputation and project timing decide, not geography.
Tile roof installation by type: Chicago vs Evanston
Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Chicago | Evanston |
|---|---|---|
| Concrete tile | $12,200–$24,150 | $12,200–$24,150 |
| Clay / terracotta tile | $16,200–$32,100 | $16,200–$32,100 |
| Slate | $23,000–$57,050 | $23,000–$57,050 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
Tile roof installation by roof size: Chicago vs Evanston
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Chicago | Evanston |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,250–$16,200 | $8,250–$16,200 |
| 1,500 sq ft (15 squares) | $10,500–$21,850 | $10,500–$21,850 |
| 2,000 sq ft (20 squares) | $12,200–$28,700 | $12,200–$28,700 |
| 2,500 sq ft (25 squares) | $15,050–$34,350 | $15,050–$34,350 |
| 3,000+ sq ft (30 squares) | $18,450–$41,150 | $18,450–$41,150 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Chicago vs Evanston
Is tile roof installation cheaper in Chicago or Evanston?
tile roof installation costs about the same in both — roughly $20,450 in each city.
Why does tile roof installation cost more in Evanston than Chicago?
The main driver is local labor rates: Evanston's labor index is 1.14 versus 1.14 in Chicago. Climate zone (cold vs cold) also shift the total.
How much is tile roof installation in Chicago, IL?
Chicago homeowners can expect $12,200 to $28,700 for tile roof installation in 2026, with $20,450 the typical number.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $38.1/hr around Chicago-Naperville-Elgin versus $38.1/hr near Chicago-Naperville-Elgin. With labor making up about 60% of a tile roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy tile roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Chicago and Evanston, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on tile roof installation cost?
No — the cost is essentially identical between Chicago and Evanston. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik