Tile Roof Installation cost: Broken Arrow vs Enid (2026)
Budget-wise, tile roof installation in Broken Arrow ($17,050) runs 1% less than in Enid ($17,250), a roughly $200 spread.
Broken Arrow OK
Lower costTypically around $17,050
Enid OK
Typically around $17,250
Broken Arrow vs Enid: full breakdown
| Factor | Broken Arrow | Enid |
|---|---|---|
| Typical 2026 cost | $17,050 | $17,250 |
| Estimated range | $10,200–$23,900 | $10,300–$24,150 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $10,250 | $10,350 |
| Materials/equipment | $6,800 | $6,900 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
1% is within noise for tile roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Tile roof installation by type: Broken Arrow vs Enid
We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Broken Arrow | Enid |
|---|---|---|
| Concrete tile | $10,200–$20,100 | $10,300–$20,350 |
| Clay / terracotta tile | $13,500–$26,750 | $13,650–$27,000 |
| Slate | $19,150–$47,550 | $19,350–$48,050 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Tile roof installation by roof size: Broken Arrow vs Enid
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Broken Arrow | Enid |
|---|---|---|
| 1,000 sq ft (10 squares) | $6,850–$13,500 | $6,950–$13,650 |
| 1,500 sq ft (15 squares) | $8,750–$18,200 | $8,850–$18,400 |
| 2,000 sq ft (20 squares) | $10,200–$23,900 | $10,300–$24,150 |
| 2,500 sq ft (25 squares) | $12,550–$28,650 | $12,700–$28,950 |
| 3,000+ sq ft (30 squares) | $15,400–$34,300 | $15,550–$34,650 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Broken Arrow; we use Oklahoma regional price parity instead.
Oklahoma City metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Broken Arrow vs Enid
Is tile roof installation cheaper in Broken Arrow or Enid?
Yes — Enid costs more. Expect around $17,250 for tile roof installation there against $17,050 in Broken Arrow, about $200 (1%) apart in 2026.
Why does tile roof installation cost more in Enid than Broken Arrow?
Labor rates explain most of it — 0.96 in Enid vs 0.95 in Broken Arrow. A mixed climate versus mixed accounts for the rest.
How much is tile roof installation in Broken Arrow, OK?
Expect to pay $10,200 to $23,900 for tile roof installation in Broken Arrow in 2026, averaging around $17,050.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Broken Arrow and Enid (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
Rarely. The $200 difference is real but one-time, and you can often close most of it in Enid by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik