Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Bothell vs Tri-Cities (2026)

Bothell runs 16% higher than Tri-Cities for tile roof installation — expect around $21,500 in Bothell against $18,500 in Tri-Cities, a difference of about $3,000.

Bothell WA

$12,850 $30,100

Typically around $21,500

Tri-Cities WA

Lower cost
$11,050 $25,900

Typically around $18,500

Expect to pay roughly $3,000 (16%) more for tile roof installation in Bothell than in Tri-Cities — local labor is the main reason.
Side by side

Bothell vs Tri-Cities: full breakdown

FactorBothellTri-Cities
Typical 2026 cost$21,500$18,500
Estimated range$12,850–$30,100$11,050–$25,900
Labor index (vs US)×1.19×1.02
Climate zoneMixedMixed
Climate factor×1×1
Local permit$325$300
Labor share$12,900$11,100
Materials/equipment$8,600$7,400

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

The verdict

Is the price difference a dealbreaker?

A 16% spread (roughly $3,000) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Bothell typically recover some of it.

By type

Tile roof installation by type: Bothell vs Tri-Cities

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeBothellTri-Cities
Concrete tile$12,850$25,350$11,050$21,800
Clay / terracotta tile$17,000$33,700$14,650$28,950
Slate$24,150$59,900$20,800$51,500

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

By size

Tile roof installation by roof size: Bothell vs Tri-Cities

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeBothellTri-Cities
1,000 sq ft (10 squares)$8,650$17,000$7,450$14,650
1,500 sq ft (15 squares)$11,050$22,950$9,500$19,750
2,000 sq ft (20 squares)$12,850$30,100$11,050$25,900
2,500 sq ft (25 squares)$15,800$36,050$13,600$31,000
3,000+ sq ft (30 squares)$19,400$43,200$16,700$37,150

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

Local labor reality

What roofing pros earn in each metro

About 60% of a tile roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.

Bothell, WA
$41.1/hr

Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.

Tri-Cities, WA
Modeled from state data

No BLS metro wage series for Tri-Cities; we use Washington regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

Our take

A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.

FAQ

Bothell vs Tri-Cities

Is tile roof installation cheaper in Bothell or Tri-Cities?

Tri-Cities comes out ahead here, at roughly $18,500 for tile roof installation compared with $21,500 in Bothell — a 16% ($3,000) gap as of 2026.

Why does tile roof installation cost more in Bothell than Tri-Cities?

It comes down to labor: Bothell indexes at 1.19 against Tri-Cities's 1.02. The mixed-vs-mixed climate difference, plus permit fees, adds to the gap.

How much is tile roof installation in Bothell, WA?

Bothell homeowners can expect $12,850 to $30,100 for tile roof installation in 2026, with $21,500 the typical number.

When is the cheapest time to buy tile roof installation — and does it differ by city?

No, the seasonal pattern is the same in Bothell and Tri-Cities: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.

Should I choose where to live based on tile roof installation cost?

Rarely. The $3,000 difference is real but one-time, and you can often close most of it in Bothell by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik