Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Boston vs Somerville (2026)

Boston and Somerville are a near-perfect match on tile roof installation cost in 2026, both landing around $20,550.

Boston MA

$12,300 $28,800

Typically around $20,550

Somerville MA

$12,300 $28,800

Typically around $20,550

Side by side

Boston vs Somerville: full breakdown

FactorBostonSomerville
Typical 2026 cost$20,550$20,550
Estimated range$12,300–$28,800$12,300–$28,800
Labor index (vs US)×1.14×1.14
Climate zoneColdCold
Climate factor×1×1
Local permit$325$325
Labor share$12,350$12,350
Materials/equipment$8,200$8,200

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

The verdict

Basically a tie — focus on the contractor

The two metros are effectively a wash for tile roof installation — pick on contractor quality and timing, not location.

By type

Tile roof installation by type: Boston vs Somerville

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeBostonSomerville
Concrete tile$12,300$24,250$12,300$24,250
Clay / terracotta tile$16,300$32,250$16,300$32,250
Slate$23,100$57,300$23,100$57,300

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Tile roof installation by roof size: Boston vs Somerville

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeBostonSomerville
1,000 sq ft (10 squares)$8,300$16,300$8,300$16,300
1,500 sq ft (15 squares)$10,600$22,000$10,600$22,000
2,000 sq ft (20 squares)$12,300$28,800$12,300$28,800
2,500 sq ft (25 squares)$15,150$34,500$15,150$34,500
3,000+ sq ft (30 squares)$18,550$41,350$18,550$41,350

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

About 60% of a tile roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.

Boston, MA
$38.4/hr

Boston-Cambridge-Newton metro · about 23% above the US average installer wage.

Somerville, MA
$38.4/hr

Boston-Cambridge-Newton metro · about 23% above the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

The value case

Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Boston vs Somerville

Is tile roof installation cheaper in Boston or Somerville?

Not really — both cities land at almost the same number for tile roof installation, around $20,550 each.

Why does tile roof installation cost more in Somerville than Boston?

It comes down to labor: Somerville indexes at 1.14 against Boston's 1.14. The cold-vs-cold climate difference adds to the gap.

How much is tile roof installation in Boston, MA?

Expect to pay $12,300 to $28,800 for tile roof installation in Boston in 2026, averaging around $20,550.

Do roofing pros really charge more in one city?

It's not a myth — BLS data puts installer wages at about $38.4/hr in the Boston-Cambridge-Newton area and $38.4/hr in Boston-Cambridge-Newton. Given labor is around 60% of a tile roof installation job's cost, that gap explains most of the price spread.

When is the cheapest time to buy tile roof installation — and does it differ by city?

No, the seasonal pattern is the same in Boston and Somerville: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.

Should I choose where to live based on tile roof installation cost?

Cost shouldn't be the deciding factor between Boston and Somerville — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik