Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Binghamton vs Syracuse (2026)

Budget-wise, tile roof installation in Binghamton ($17,150) runs 1% less than in Syracuse ($17,400), a roughly $250 spread.

Binghamton NY

Lower cost
$10,250 $24,050

Typically around $17,150

Syracuse NY

$10,400 $24,400

Typically around $17,400

The $250 (1%) premium on tile roof installation in Syracuse versus Binghamton comes down mostly to local labor rates.
Side by side

Binghamton vs Syracuse: full breakdown

FactorBinghamtonSyracuse
Typical 2026 cost$17,150$17,400
Estimated range$10,250–$24,050$10,400–$24,400
Labor index (vs US)×0.95×0.96
Climate zoneColdCold
Climate factor×1×1
Local permit$250$275
Labor share$10,300$10,450
Materials/equipment$6,850$6,950

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

The verdict

Is the price difference a dealbreaker?

A 1% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.

By type

Tile roof installation by type: Binghamton vs Syracuse

We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeBinghamtonSyracuse
Concrete tile$10,250$20,250$10,400$20,500
Clay / terracotta tile$13,600$26,900$13,750$27,250
Slate$19,300$47,850$19,550$48,500

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

By size

Tile roof installation by roof size: Binghamton vs Syracuse

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeBinghamtonSyracuse
1,000 sq ft (10 squares)$6,900$13,600$7,000$13,750
1,500 sq ft (15 squares)$8,800$18,350$8,950$18,600
2,000 sq ft (20 squares)$10,250$24,050$10,400$24,400
2,500 sq ft (25 squares)$12,650$28,800$12,800$29,200
3,000+ sq ft (30 squares)$15,500$34,500$15,700$35,000

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

Best time to buy

Cheapest time for tile roof installation in either city

Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The do-it-right case

A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.

The value case

Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Binghamton vs Syracuse

Is tile roof installation cheaper in Binghamton or Syracuse?

In 2026, tile roof installation is cheaper in Binghamton at about $17,150, versus $17,400 in Syracuse — a difference of about $250 (1%).

Why does tile roof installation cost more in Syracuse than Binghamton?

It comes down to labor: Syracuse indexes at 0.96 against Binghamton's 0.95. The cold-vs-cold climate difference, plus permit fees, adds to the gap.

How much is tile roof installation in Binghamton, NY?

In Binghamton, tile roof installation typically runs $10,250–$24,050 in 2026, with most homeowners paying around $17,150.

When is the cheapest time to buy tile roof installation — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Binghamton and Syracuse, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on tile roof installation cost?

Probably not. Yes, $250 is a real gap, but it's a one-time cost you can partly offset in Syracuse with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik