Tile Roof Installation cost: Beverly Cove vs Lowell (2026)
Beverly Cove and Lowell are a near-perfect match on tile roof installation cost in 2026, both landing around $20,550.
Beverly Cove MA
Typically around $20,550
Lowell MA
Typically around $20,550
Beverly Cove vs Lowell: full breakdown
| Factor | Beverly Cove | Lowell |
|---|---|---|
| Typical 2026 cost | $20,550 | $20,550 |
| Estimated range | $12,300–$28,800 | $12,300–$28,800 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $12,350 | $12,350 |
| Materials/equipment | $8,200 | $8,200 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Basically a tie — focus on the contractor
Neither metro has a cost edge on tile roof installation — spend your decision-making energy on the contractor, not the location.
Tile roof installation by type: Beverly Cove vs Lowell
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Beverly Cove | Lowell |
|---|---|---|
| Concrete tile | $12,300–$24,250 | $12,300–$24,250 |
| Clay / terracotta tile | $16,300–$32,250 | $16,300–$32,250 |
| Slate | $23,100–$57,300 | $23,100–$57,300 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Tile roof installation by roof size: Beverly Cove vs Lowell
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Beverly Cove | Lowell |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,300–$16,300 | $8,300–$16,300 |
| 1,500 sq ft (15 squares) | $10,600–$22,000 | $10,600–$22,000 |
| 2,000 sq ft (20 squares) | $12,300–$28,800 | $12,300–$28,800 |
| 2,500 sq ft (25 squares) | $15,150–$34,500 | $15,150–$34,500 |
| 3,000+ sq ft (30 squares) | $18,550–$41,350 | $18,550–$41,350 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Boston-Cambridge-Newton metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Beverly Cove vs Lowell
Is tile roof installation cheaper in Beverly Cove or Lowell?
Practically identical — expect around $20,550 for tile roof installation whichever city you're in.
Why does tile roof installation cost more in Lowell than Beverly Cove?
It comes down to labor: Lowell indexes at 1.14 against Beverly Cove's 1.14. The cold-vs-cold climate difference adds to the gap.
How much is tile roof installation in Beverly Cove, MA?
tile roof installation in Beverly Cove runs $12,300–$28,800 as of 2026 — most jobs land near $20,550.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $38.4/hr in the Boston-Cambridge-Newton area and $38.4/hr in Boston-Cambridge-Newton. Given labor is around 60% of a tile roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Beverly Cove and Lowell: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
No — the cost is essentially identical between Beverly Cove and Lowell. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik