Tile Roof Installation cost: Bentonville vs Fort Smith (2026)
Budget-wise, tile roof installation in Bentonville ($17,050) runs 3% more than in Fort Smith ($16,500), a roughly $550 spread.
Bentonville AR
Typically around $17,050
Fort Smith AR
Lower costTypically around $16,500
Bentonville vs Fort Smith: full breakdown
| Factor | Bentonville | Fort Smith |
|---|---|---|
| Typical 2026 cost | $17,050 | $16,500 |
| Estimated range | $10,200–$23,900 | $9,850–$23,150 |
| Labor index (vs US) | ×0.95 | ×0.92 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $10,250 | $9,900 |
| Materials/equipment | $6,800 | $6,600 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
3% is within noise for tile roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Tile roof installation by type: Bentonville vs Fort Smith
Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Bentonville | Fort Smith |
|---|---|---|
| Concrete tile | $10,200–$20,100 | $9,850–$19,500 |
| Clay / terracotta tile | $13,500–$26,750 | $13,050–$25,900 |
| Slate | $19,150–$47,550 | $18,550–$46,050 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Tile roof installation by roof size: Bentonville vs Fort Smith
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Bentonville | Fort Smith |
|---|---|---|
| 1,000 sq ft (10 squares) | $6,850–$13,500 | $6,650–$13,050 |
| 1,500 sq ft (15 squares) | $8,750–$18,200 | $8,500–$17,650 |
| 2,000 sq ft (20 squares) | $10,200–$23,900 | $9,850–$23,150 |
| 2,500 sq ft (25 squares) | $12,550–$28,650 | $12,150–$27,750 |
| 3,000+ sq ft (30 squares) | $15,400–$34,300 | $14,900–$33,250 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Bentonville vs Fort Smith
Is tile roof installation cheaper in Bentonville or Fort Smith?
In 2026, tile roof installation is cheaper in Fort Smith at about $16,500, versus $17,050 in Bentonville — a difference of about $550 (3%).
Why does tile roof installation cost more in Bentonville than Fort Smith?
Bentonville's higher labor index (0.95 vs 0.92 in Fort Smith) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is tile roof installation in Bentonville, AR?
In Bentonville, tile roof installation typically runs $10,200–$23,900 in 2026, with most homeowners paying around $17,050.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Bentonville and Fort Smith: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
Rarely. The $550 difference is real but one-time, and you can often close most of it in Bentonville by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik