Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Beaumont vs San Antonio (2026)

Beaumont runs 0% lower than San Antonio for tile roof installation — expect around $17,900 in Beaumont against $17,950 in San Antonio, a difference of about $50.

Beaumont TX

Lower cost
$10,700 $25,100

Typically around $17,900

San Antonio TX

$10,700 $25,150

Typically around $17,950

The $50 (0%) premium on tile roof installation in San Antonio versus Beaumont comes down mostly to local labor rates.
Side by side

Beaumont vs San Antonio: full breakdown

FactorBeaumontSan Antonio
Typical 2026 cost$17,900$17,950
Estimated range$10,700–$25,100$10,700–$25,150
Labor index (vs US)×0.95×0.95
Climate zoneHotHot
Climate factor×1.05×1.05
Local permit$250$275
Labor share$10,750$10,750
Materials/equipment$7,150$7,200

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

The verdict

How much should this gap actually matter?

0% is within noise for tile roof installation — contractor selection and timing move the price more than which of these two metros you're in.

By type

Tile roof installation by type: Beaumont vs San Antonio

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeBeaumontSan Antonio
Concrete tile$10,700$21,100$10,700$21,150
Clay / terracotta tile$14,150$28,050$14,200$28,150
Slate$20,100$49,900$20,200$50,050

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

By size

Tile roof installation by roof size: Beaumont vs San Antonio

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeBeaumontSan Antonio
1,000 sq ft (10 squares)$7,200$14,150$7,250$14,200
1,500 sq ft (15 squares)$9,200$19,100$9,250$19,200
2,000 sq ft (20 squares)$10,700$25,100$10,700$25,150
2,500 sq ft (25 squares)$13,150$30,050$13,200$30,150
3,000+ sq ft (30 squares)$16,150$36,000$16,200$36,100

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

Local labor reality

What roofing pros earn in each metro

Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.

Beaumont, TX
Modeled from state data

No BLS metro wage series for Beaumont; we use Texas regional price parity instead.

San Antonio, TX
$28.4/hr

San Antonio-New Braunfels metro · about 9% below the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The value case

Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

Our take

The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.

FAQ

Beaumont vs San Antonio

Is tile roof installation cheaper in Beaumont or San Antonio?

Beaumont wins on price: tile roof installation runs about $17,900 there versus $17,950 in San Antonio, a gap of roughly $50 (0%) as of 2026.

Why does tile roof installation cost more in San Antonio than Beaumont?

Labor rates explain most of it — 0.95 in San Antonio vs 0.95 in Beaumont. A hot climate versus hot, along with differing permit costs, accounts for the rest.

How much is tile roof installation in Beaumont, TX?

tile roof installation in Beaumont runs $10,700–$25,100 as of 2026 — most jobs land near $17,900.

When is the cheapest time to buy tile roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Beaumont and San Antonio (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on tile roof installation cost?

Rarely. The $50 difference is real but one-time, and you can often close most of it in San Antonio by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik