Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Atlanta vs Savannah (2026)

Atlanta runs 2% lower than Savannah for tile roof installation — expect around $18,200 in Atlanta against $18,500 in Savannah, a difference of about $300.

Atlanta GA

Lower cost
$10,850 $25,500

Typically around $18,200

Savannah GA

$11,050 $25,900

Typically around $18,500

Savannah costs about $300 (2%) more than Atlanta for tile roof installation, largely because of the local labor rate gap.
Side by side

Atlanta vs Savannah: full breakdown

FactorAtlantaSavannah
Typical 2026 cost$18,200$18,500
Estimated range$10,850–$25,500$11,050–$25,900
Labor index (vs US)×0.96×0.98
Climate zoneHotHot
Climate factor×1.05×1.05
Local permit$275$275
Labor share$10,900$11,100
Materials/equipment$7,300$7,400

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

The verdict

Is the gap worth worrying about?

2% is within noise for tile roof installation — contractor selection and timing move the price more than which of these two metros you're in.

By type

Tile roof installation by type: Atlanta vs Savannah

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeAtlantaSavannah
Concrete tile$10,850$21,450$11,050$21,800
Clay / terracotta tile$14,400$28,500$14,600$28,950
Slate$20,450$50,700$20,750$51,500

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

By size

Tile roof installation by roof size: Atlanta vs Savannah

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeAtlantaSavannah
1,000 sq ft (10 squares)$7,350$14,400$7,450$14,600
1,500 sq ft (15 squares)$9,350$19,450$9,500$19,750
2,000 sq ft (20 squares)$10,850$25,500$11,050$25,900
2,500 sq ft (25 squares)$13,400$30,550$13,600$31,000
3,000+ sq ft (30 squares)$16,400$36,600$16,650$37,150

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

Local labor reality

What roofing pros earn in each metro

With labor making up about 60% of a tile roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.

Atlanta, GA
$29.1/hr

Atlanta-Sandy Springs-Roswell metro · about 7% below the US average installer wage.

Savannah, GA
Modeled from state data

No BLS metro wage series for Savannah; we use Georgia regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Atlanta vs Savannah

Is tile roof installation cheaper in Atlanta or Savannah?

Yes — Savannah costs more. Expect around $18,500 for tile roof installation there against $18,200 in Atlanta, about $300 (2%) apart in 2026.

Why does tile roof installation cost more in Savannah than Atlanta?

Savannah's higher labor index (0.98 vs 0.96 in Atlanta) is the biggest factor, with the hot/hot climate split playing a smaller role.

How much is tile roof installation in Atlanta, GA?

Expect to pay $10,850 to $25,500 for tile roof installation in Atlanta in 2026, averaging around $18,200.

When is the cheapest time to buy tile roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Atlanta and Savannah (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on tile roof installation cost?

Probably not. Yes, $300 is a real gap, but it's a one-time cost you can partly offset in Savannah with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik