Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Asheville vs Winston-Salem (2026)

Budget-wise, tile roof installation in Asheville ($17,600) runs 3% more than in Winston-Salem ($17,150), a roughly $450 spread.

Asheville NC

$10,500 $24,700

Typically around $17,600

Winston-Salem NC

Lower cost
$10,250 $24,050

Typically around $17,150

Expect to pay roughly $450 (3%) more for tile roof installation in Asheville than in Winston-Salem — local labor is the main reason.
Side by side

Asheville vs Winston-Salem: full breakdown

FactorAshevilleWinston-Salem
Typical 2026 cost$17,600$17,150
Estimated range$10,500–$24,700$10,250–$24,050
Labor index (vs US)×0.98×0.95
Climate zoneMixedMixed
Climate factor×1×1
Local permit$275$250
Labor share$10,550$10,300
Materials/equipment$7,050$6,850

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

The verdict

Is the gap worth worrying about?

A 3% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.

By type

Tile roof installation by type: Asheville vs Winston-Salem

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeAshevilleWinston-Salem
Concrete tile$10,500$20,750$10,250$20,250
Clay / terracotta tile$13,950$27,600$13,600$26,900
Slate$19,800$49,100$19,300$47,850

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

By size

Tile roof installation by roof size: Asheville vs Winston-Salem

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeAshevilleWinston-Salem
1,000 sq ft (10 squares)$7,100$13,950$6,900$13,600
1,500 sq ft (15 squares)$9,050$18,800$8,800$18,350
2,000 sq ft (20 squares)$10,500$24,700$10,250$24,050
2,500 sq ft (25 squares)$12,950$29,550$12,650$28,800
3,000+ sq ft (30 squares)$15,900$35,400$15,500$34,500

Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.

Best time to buy

Cheapest time for tile roof installation in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

The do-it-right case

Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

Our take

Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.

FAQ

Asheville vs Winston-Salem

Is tile roof installation cheaper in Asheville or Winston-Salem?

Winston-Salem wins on price: tile roof installation runs about $17,150 there versus $17,600 in Asheville, a gap of roughly $450 (3%) as of 2026.

Why does tile roof installation cost more in Asheville than Winston-Salem?

The main driver is local labor rates: Asheville's labor index is 0.98 versus 0.95 in Winston-Salem. Climate zone (mixed vs mixed) and permit fees also shift the total.

How much is tile roof installation in Asheville, NC?

In Asheville, tile roof installation typically runs $10,500–$24,700 in 2026, with most homeowners paying around $17,600.

When is the cheapest time to buy tile roof installation — and does it differ by city?

No, the seasonal pattern is the same in Asheville and Winston-Salem: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.

Should I choose where to live based on tile roof installation cost?

Not really — the $450 gap is one-time, and smart timing and tighter quotes in Asheville can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik