Tile Roof Installation cost: Apple Valley vs Bloomington (2026)
There's essentially no price gap here: tile roof installation runs close to $19,950 in both Apple Valley and Bloomington in 2026.
Apple Valley MN
Typically around $19,950
Bloomington MN
Typically around $19,950
Apple Valley vs Bloomington: full breakdown
| Factor | Apple Valley | Bloomington |
|---|---|---|
| Typical 2026 cost | $19,950 | $19,950 |
| Estimated range | $11,900–$27,950 | $11,900–$27,950 |
| Labor index (vs US) | ×1.11 | ×1.11 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,950 | $11,950 |
| Materials/equipment | $8,000 | $8,000 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Basically a tie — focus on the contractor
Neither metro has a cost edge on tile roof installation — spend your decision-making energy on the contractor, not the location.
Tile roof installation by type: Apple Valley vs Bloomington
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Apple Valley | Bloomington |
|---|---|---|
| Concrete tile | $11,900–$23,550 | $11,900–$23,550 |
| Clay / terracotta tile | $15,800–$31,300 | $15,800–$31,300 |
| Slate | $22,450–$55,650 | $22,450–$55,650 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
Tile roof installation by roof size: Apple Valley vs Bloomington
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Apple Valley | Bloomington |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,050–$15,800 | $8,050–$15,800 |
| 1,500 sq ft (15 squares) | $10,250–$21,350 | $10,250–$21,350 |
| 2,000 sq ft (20 squares) | $11,900–$27,950 | $11,900–$27,950 |
| 2,500 sq ft (25 squares) | $14,700–$33,500 | $14,700–$33,500 |
| 3,000+ sq ft (30 squares) | $18,000–$40,150 | $18,000–$40,150 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a tile roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Apple Valley vs Bloomington
Is tile roof installation cheaper in Apple Valley or Bloomington?
tile roof installation costs about the same in both — roughly $19,950 in each city.
Why does tile roof installation cost more in Bloomington than Apple Valley?
Labor rates explain most of it — 1.11 in Bloomington vs 1.11 in Apple Valley. A cold climate versus cold accounts for the rest.
How much is tile roof installation in Apple Valley, MN?
In Apple Valley, tile roof installation typically runs $11,900–$27,950 in 2026, with most homeowners paying around $19,950.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $36.7/hr around Minneapolis-St. Paul-Bloomington versus $36.7/hr near Minneapolis-St. Paul-Bloomington. With labor making up about 60% of a tile roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Apple Valley and Bloomington (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
No — the cost is essentially identical between Apple Valley and Bloomington. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik