Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Amherst vs Brooklyn (2026)

In 2026, tile roof installation is about 18% less expensive in Amherst than in Brooklyn. Most homeowners pay around $17,400 in Amherst versus $20,550 in Brooklyn — a gap of roughly $3,150.

Amherst NY

Lower cost
$10,400 $24,400

Typically around $17,400

Brooklyn NY

$12,300 $28,800

Typically around $20,550

Brooklyn costs about $3,150 (18%) more than Amherst for tile roof installation, largely because of the local labor rate gap.
Side by side

Amherst vs Brooklyn: full breakdown

FactorAmherstBrooklyn
Typical 2026 cost$17,400$20,550
Estimated range$10,400–$24,400$12,300–$28,800
Labor index (vs US)×0.96×1.14
Climate zoneColdCold
Climate factor×1×1
Local permit$275$325
Labor share$10,450$12,350
Materials/equipment$6,950$8,200

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

The verdict

Is the gap worth worrying about?

18% (about $3,150) is enough to notice on a tile roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Brooklyn can close much of that gap.

By type

Tile roof installation by type: Amherst vs Brooklyn

We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeAmherstBrooklyn
Concrete tile$10,400$20,500$12,300$24,250
Clay / terracotta tile$13,750$27,250$16,250$32,200
Slate$19,550$48,500$23,100$57,250

These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.

By size

Tile roof installation by roof size: Amherst vs Brooklyn

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeAmherstBrooklyn
1,000 sq ft (10 squares)$7,000$13,750$8,300$16,250
1,500 sq ft (15 squares)$8,950$18,600$10,550$21,950
2,000 sq ft (20 squares)$10,400$24,400$12,300$28,800
2,500 sq ft (25 squares)$12,800$29,200$15,150$34,500
3,000+ sq ft (30 squares)$15,700$35,000$18,550$41,300

Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

Labor is about 60% of a tile roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.

Amherst, NY
Modeled from state data

No BLS metro wage series for Amherst; we use New York regional price parity instead.

Brooklyn, NY
$38.3/hr

New York-Newark-Jersey City metro · about 23% above the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

Our take

A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.

FAQ

Amherst vs Brooklyn

Is tile roof installation cheaper in Amherst or Brooklyn?

Amherst wins on price: tile roof installation runs about $17,400 there versus $20,550 in Brooklyn, a gap of roughly $3,150 (18%) as of 2026.

Why does tile roof installation cost more in Brooklyn than Amherst?

The main driver is local labor rates: Brooklyn's labor index is 1.14 versus 0.96 in Amherst. Climate zone (cold vs cold) and permit fees also shift the total.

How much is tile roof installation in Amherst, NY?

Expect to pay $10,400 to $24,400 for tile roof installation in Amherst in 2026, averaging around $17,400.

When is the cheapest time to buy tile roof installation — and does it differ by city?

The best window is the same in both Amherst and Brooklyn: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on tile roof installation cost?

That would be a stretch. $3,150 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Brooklyn can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik