Tile Flooring Installation cost: Murray vs Orem (2026)
Murray runs 1% higher than Orem for tile flooring installation — expect around $7,600 in Murray against $7,550 in Orem, a difference of about $50.
Murray UT
Typically around $7,600
Orem UT
Lower costTypically around $7,550
Murray vs Orem: full breakdown
| Factor | Murray | Orem |
|---|---|---|
| Typical 2026 cost | $7,600 | $7,550 |
| Estimated range | $3,450–$11,750 | $3,400–$11,650 |
| Labor index (vs US) | ×0.98 | ×0.97 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | None | None |
| Labor share | $4,550 | $4,550 |
| Materials/equipment | $3,050 | $3,000 |
All figures are 2026 localized planning estimates for tile flooring installation — get an actual quote before you commit.
How much should this gap actually matter?
A 1% difference on tile flooring installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Tile flooring installation by type: Murray vs Orem
Every tile flooring installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Murray | Orem |
|---|---|---|
| Ceramic | $3,450–$7,850 | $3,400–$7,750 |
| Porcelain | $4,400–$9,800 | $4,350–$9,700 |
| Natural stone (travertine / slate) | $5,900–$13,750 | $5,800–$13,600 |
| Marble | $7,850–$17,650 | $7,750–$17,450 |
These are 2026 planning figures for tile flooring installation, localized to each city — not formal quotes.
Tile flooring installation by floor area: Murray vs Orem
Tile is priced around $7–$25/sq ft for a complete installed job — labor-heavy because of mortar, leveling, grouting, and cuts. Intricate patterns and large rooms with many cuts push the per-square-foot cost up.
| Size | Murray | Orem |
|---|---|---|
| 100 sq ft (bathroom) | $800–$2,450 | $800–$2,450 |
| 200 sq ft (small room) | $1,450–$4,400 | $1,450–$4,350 |
| 500 sq ft (large room) | $3,450–$8,850 | $3,400–$8,750 |
| 1,000+ sq ft (main floor) | $6,850–$15,700 | $6,800–$15,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile flooring installation range for local labor, climate and permits.
What flooring pros earn in each metro
Labor is about 60% of a tile flooring installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
No BLS metro wage series for Orem; we use Utah regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile flooring installation in either city
Once the holidays end, flooring demand drops and retailers respond with January clearance sales — which happens to line up with installers having open calendars too.
How should you budget a flooring project?
The floor you pick gets all the attention; the floor you can't see sets the price. Here's how the surface and the subfloor pull a flooring budget in opposite directions.
The material-value case
You get the warmth of a wood floor without paying wood prices — LVP and laminate deliver the look and hold up to moisture far better in kitchens, baths and basements. In high-traffic homes watching the bottom line, they're the practical winner.
The hidden-cost case
Look below the surface before you sign anything. Uneven subfloors need leveling, the old material has to come out and get disposed of, and an estimate that leaves those lines blank is one that changes after demolition starts.
The longevity case
Hardwood carries a higher sticker, but a solid plank sands and refinishes several times across its life and it lifts what the house sells for. For owners planning to stay, spreading that cost over decades makes the premium reasonable.
Choose the material based on how long you're staying and how much wear the floor will see — then don't skip the subfloor line item. An ignored subfloor turns a cheap material into an expensive redo.
Murray vs Orem
Is tile flooring installation cheaper in Murray or Orem?
In 2026, tile flooring installation is cheaper in Orem at about $7,550, versus $7,600 in Murray — a difference of about $50 (1%).
Why does tile flooring installation cost more in Murray than Orem?
It comes down to labor: Murray indexes at 0.98 against Orem's 0.97. The cold-vs-cold climate difference adds to the gap.
How much is tile flooring installation in Murray, UT?
Expect to pay $3,450 to $11,750 for tile flooring installation in Murray in 2026, averaging around $7,600.
When is the cheapest time to buy tile flooring installation — and does it differ by city?
The best window is the same in both Murray and Orem: Winter and the post-holiday January window, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during late spring and summer.
Should I choose where to live based on tile flooring installation cost?
Not really — the $50 gap is one-time, and smart timing and tighter quotes in Murray can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare tile flooring installation in other cities
Updated June 2026 · By Serhat Özçelik