Tile Flooring Installation cost: Aurora vs Belmont Cragin (2026)
Tile flooring installation costs about the same in Aurora and Belmont Cragin in 2026 — roughly $8,800 in each.
Aurora IL
Typically around $8,800
Belmont Cragin IL
Typically around $8,800
Aurora vs Belmont Cragin: full breakdown
| Factor | Aurora | Belmont Cragin |
|---|---|---|
| Typical 2026 cost | $8,800 | $8,800 |
| Estimated range | $3,950–$13,600 | $3,950–$13,600 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | None | None |
| Labor share | $5,300 | $5,300 |
| Materials/equipment | $3,500 | $3,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile flooring installation range for local labor, climate and permits.
Basically a tie — focus on the contractor
Neither metro has a cost edge on tile flooring installation — spend your decision-making energy on the contractor, not the location.
Tile flooring installation by type: Aurora vs Belmont Cragin
Every tile flooring installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Aurora | Belmont Cragin |
|---|---|---|
| Ceramic | $3,950–$9,100 | $3,950–$9,100 |
| Porcelain | $5,100–$11,350 | $5,100–$11,350 |
| Natural stone (travertine / slate) | $6,800–$15,900 | $6,800–$15,900 |
| Marble | $9,100–$20,450 | $9,100–$20,450 |
All figures are 2026 localized planning estimates for tile flooring installation — get an actual quote before you commit.
Tile flooring installation by floor area: Aurora vs Belmont Cragin
Tile is priced around $7–$25/sq ft for a complete installed job — labor-heavy because of mortar, leveling, grouting, and cuts. Intricate patterns and large rooms with many cuts push the per-square-foot cost up.
| Size | Aurora | Belmont Cragin |
|---|---|---|
| 100 sq ft (bathroom) | $900–$2,850 | $900–$2,850 |
| 200 sq ft (small room) | $1,700–$5,100 | $1,700–$5,100 |
| 500 sq ft (large room) | $3,950–$10,200 | $3,950–$10,200 |
| 1,000+ sq ft (main floor) | $7,950–$18,150 | $7,950–$18,150 |
Tile flooring installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What flooring pros earn in each metro
Roughly 60% of what you pay for tile flooring installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Chicago-Naperville-Elgin metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile flooring installation in either city
Demand for flooring falls off right after the holidays, and stores mark down stock to move it — the same stretch when installers have the least competing work.
How should you budget a flooring project?
Homeowners budget for the flooring they can see and forget the subfloor they can't. Our editors on how to weigh both.
The longevity case
Solid hardwood costs more but can be refinished for decades and adds resale value. If you're staying put, the higher upfront price amortizes well.
The material-value case
Laminate and luxury vinyl deliver a hardwood look for a fraction of the price and handle moisture better — the value pick for busy homes and tight budgets.
The hidden-cost case
The surprise isn't the flooring — it's the subfloor. Budget for leveling, removal and disposal; a bid that ignores them will be "revised" mid-job.
Pick material by how long you'll stay and how hard the floor will work, then budget for subfloor prep up front. The cheapest material over an ignored subfloor is the most expensive mistake.
Aurora vs Belmont Cragin
Is tile flooring installation cheaper in Aurora or Belmont Cragin?
There's no meaningful difference: tile flooring installation runs about $8,800 in both places.
Why does tile flooring installation cost more in Belmont Cragin than Aurora?
Labor rates explain most of it — 1.14 in Belmont Cragin vs 1.14 in Aurora. A cold climate versus cold accounts for the rest.
How much is tile flooring installation in Aurora, IL?
In Aurora, tile flooring installation typically runs $3,950–$13,600 in 2026, with most homeowners paying around $8,800.
Do flooring pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $38.1/hr in Chicago-Naperville-Elgin compared with $38.1/hr in Chicago-Naperville-Elgin (BLS OEWS). Labor is about 60% of a tile flooring installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy tile flooring installation — and does it differ by city?
No, the seasonal pattern is the same in Aurora and Belmont Cragin: book during Winter and the post-holiday January window for about 5–10% in savings. Late spring and summer is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile flooring installation cost?
Cost shouldn't be the deciding factor between Aurora and Belmont Cragin — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare tile flooring installation in other cities
Updated June 2026 · By Serhat Özçelik