Spray Foam Insulation cost: Hollywood vs St. Petersburg (2026)
Budget-wise, spray foam insulation in Hollywood ($3,650) runs 3% more than in St. Petersburg ($3,550), a roughly $100 spread.
Hollywood FL
Typically around $3,650
St. Petersburg FL
Lower costTypically around $3,550
Hollywood vs St. Petersburg: full breakdown
| Factor | Hollywood | St. Petersburg |
|---|---|---|
| Typical 2026 cost | $3,650 | $3,550 |
| Estimated range | $1,450–$5,850 | $1,400–$5,650 |
| Labor index (vs US) | ×0.96 | ×0.93 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.02 | ×1.02 |
| Local permit | None | None |
| Labor share | $2,000 | $1,950 |
| Materials/equipment | $1,650 | $1,600 |
These are 2026 planning figures for spray foam insulation, localized to each city — not formal quotes.
How much should this gap actually matter?
At 3%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for spray foam insulation — focus on the contractor, not the city.
Spray foam insulation by type: Hollywood vs St. Petersburg
Below, each spray foam insulation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Hollywood | St. Petersburg |
|---|---|---|
| Open-cell | $1,450–$4,400 | $1,400–$4,250 |
| Closed-cell | $2,450–$6,850 | $2,350–$6,600 |
Spray foam insulation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Spray foam insulation by area: Hollywood vs St. Petersburg
Spray foam is priced by board foot (1 sq ft at 1 inch thick), which works out to about $1.50–$5 per sq ft of surface installed depending on foam type and thickness. Closed-cell costs more but adds twice the R-value per inch.
| Size | Hollywood | St. Petersburg |
|---|---|---|
| 500 sq ft | $900–$2,350 | $850–$2,250 |
| 1,000 sq ft | $1,450–$3,900 | $1,400–$3,750 |
| 1,500 sq ft | $2,150–$5,400 | $2,100–$5,200 |
| 2,000+ sq ft | $2,750–$6,350 | $2,650–$6,150 |
Treat these as 2026 localized estimates for spray foam insulation, not quotes from a contractor.
What insulation pros earn in each metro
Roughly 55% of what you pay for spray foam insulation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Miami-Fort Lauderdale-West Palm Beach metro · about 7% below the US average installer wage.
Tampa-St. Petersburg-Clearwater metro · about 14% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for spray foam insulation in either city
Demand for insulation spikes every fall as winter approaches, pushing prices with it. Spring and summer avoid that crowd, and utility rebate pools are frequently still fresh that early in the year.
How much insulation is worth paying for?
R-value, air-sealing and material decide both the price and the payback. Our editors on the trade-offs.
The air-sealing case
Insulation without air-sealing underperforms. Sealing leaks first is cheap and often delivers more comfort per dollar than thicker insulation alone — make sure it's in the scope.
The rebate case
Insulation carries some of the strongest incentive money in remodeling, with utility and state rebates covering a real portion of the cost since the federal 25C credit expired at the end of 2025. Look up what applies on DSIRE, then schedule the work while rebate funds are still unclaimed for the year.
The R-value case
Aim for the R-value the DOE assigns your zone, not a round number that sounds close enough. Every point you fall short is comfort you don't feel and utility savings you never bank — savings that would have covered the extra material several times over.
Payback is the whole point with insulation, and it arrives fastest when the job is done in full: air-sealing, the DOE-recommended R-value for your climate zone, and whatever utility rebates you qualify for. Trimming any one of those trims the return, not the cost.
Hollywood vs St. Petersburg
Is spray foam insulation cheaper in Hollywood or St. Petersburg?
Yes — Hollywood costs more. Expect around $3,650 for spray foam insulation there against $3,550 in St. Petersburg, about $100 (3%) apart in 2026.
Why does spray foam insulation cost more in Hollywood than St. Petersburg?
It comes down to labor: Hollywood indexes at 0.96 against St. Petersburg's 0.93. The hot-vs-hot climate difference adds to the gap.
How much is spray foam insulation in Hollywood, FL?
Expect to pay $1,450 to $5,850 for spray foam insulation in Hollywood in 2026, averaging around $3,650.
Do insulation pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $28.8/hr in the Miami-Fort Lauderdale-West Palm Beach area versus $26.9/hr around Tampa-St. Petersburg-Clearwater (BLS metro wage data). Since labor is roughly 55% of a spray foam insulation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy spray foam insulation — and does it differ by city?
The best window is the same in both Hollywood and St. Petersburg: Spring and summer, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during the pre-winter fall rush.
Should I choose where to live based on spray foam insulation cost?
That would be a stretch. $100 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Hollywood can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare spray foam insulation in other cities
Updated June 2026 · By Serhat Özçelik