Spray Foam Insulation cost: Fort Worth vs Round Rock (2026)
Fort Worth runs 1% lower than Round Rock for spray foam insulation — expect around $3,750 in Fort Worth against $3,800 in Round Rock, a difference of about $50.
Fort Worth TX
Lower costTypically around $3,750
Round Rock TX
Typically around $3,800
Fort Worth vs Round Rock: full breakdown
| Factor | Fort Worth | Round Rock |
|---|---|---|
| Typical 2026 cost | $3,750 | $3,800 |
| Estimated range | $1,500–$5,950 | $1,500–$6,100 |
| Labor index (vs US) | ×0.97 | ×0.99 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.02 | ×1.02 |
| Local permit | None | None |
| Labor share | $2,050 | $2,100 |
| Materials/equipment | $1,700 | $1,700 |
Treat these as 2026 localized estimates for spray foam insulation, not quotes from a contractor.
Is the gap worth worrying about?
A 1% difference on spray foam insulation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Spray foam insulation by type: Fort Worth vs Round Rock
Below, each spray foam insulation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Fort Worth | Round Rock |
|---|---|---|
| Open-cell | $1,500–$4,450 | $1,500–$4,550 |
| Closed-cell | $2,500–$6,950 | $2,550–$7,100 |
Spray foam insulation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Spray foam insulation by area: Fort Worth vs Round Rock
Spray foam is priced by board foot (1 sq ft at 1 inch thick), which works out to about $1.50–$5 per sq ft of surface installed depending on foam type and thickness. Closed-cell costs more but adds twice the R-value per inch.
| Size | Fort Worth | Round Rock |
|---|---|---|
| 500 sq ft | $900–$2,400 | $900–$2,450 |
| 1,000 sq ft | $1,500–$3,950 | $1,500–$4,050 |
| 1,500 sq ft | $2,200–$5,450 | $2,250–$5,550 |
| 2,000+ sq ft | $2,800–$6,450 | $2,850–$6,600 |
Treat these as 2026 localized estimates for spray foam insulation, not quotes from a contractor.
What insulation pros earn in each metro
About 55% of a spray foam insulation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Dallas-Fort Worth-Arlington metro · about 5% below the US average installer wage.
Austin-Round Rock-San Marcos metro · about 1% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for spray foam insulation in either city
Demand for insulation spikes every fall as winter approaches, pushing prices with it. Spring and summer avoid that crowd, and utility rebate pools are frequently still fresh that early in the year.
How much insulation is worth paying for?
Insulation is priced on more than thickness. Target R-value, the presence or absence of air-sealing, and the material itself each pull the number in a different direction, and each changes how fast the job pays for itself.
The R-value case
Insulate to the DOE recommendation for your climate zone — under-insulating to save money leaves comfort and energy savings on the table that would have paid the job back.
The air-sealing case
Insulation without air-sealing underperforms. Sealing leaks first is cheap and often delivers more comfort per dollar than thicker insulation alone — make sure it's in the scope.
The rebate case
Insulation has some of the best rebate math in home improvement — utility and state programs can cover a solid share (the federal 25C credits ended Dec 2025). Check DSIRE before you book and time it to a fresh rebate budget.
Don't half-do an insulation job to save money upfront: seal the air leaks first, insulate to the DOE target for your zone, and stack the rebates. The full scope pays back faster than the partial one.
Fort Worth vs Round Rock
Is spray foam insulation cheaper in Fort Worth or Round Rock?
Fort Worth comes out ahead here, at roughly $3,750 for spray foam insulation compared with $3,800 in Round Rock — a 1% ($50) gap as of 2026.
Why does spray foam insulation cost more in Round Rock than Fort Worth?
Round Rock's higher labor index (0.99 vs 0.97 in Fort Worth) is the biggest factor, with the hot/hot climate split playing a smaller role.
How much is spray foam insulation in Fort Worth, TX?
spray foam insulation in Fort Worth runs $1,500–$5,950 as of 2026 — most jobs land near $3,750.
Do insulation pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $29.7/hr in Dallas-Fort Worth-Arlington compared with $30.7/hr in Austin-Round Rock-San Marcos (BLS OEWS). Labor is about 55% of a spray foam insulation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy spray foam insulation — and does it differ by city?
No, the seasonal pattern is the same in Fort Worth and Round Rock: book during Spring and summer for about 5–10% in savings. The pre-winter fall rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on spray foam insulation cost?
Rarely. The $50 difference is real but one-time, and you can often close most of it in Round Rock by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare spray foam insulation in other cities
Updated June 2026 · By Serhat Özçelik