Spray Foam Insulation cost: Bellevue vs Redmond (2026)
In 2026, Bellevue and Redmond land on nearly identical spray foam insulation pricing — about $4,400 either way.
Bellevue WA
Typically around $4,400
Redmond WA
Typically around $4,400
Bellevue vs Redmond: full breakdown
| Factor | Bellevue | Redmond |
|---|---|---|
| Typical 2026 cost | $4,400 | $4,400 |
| Estimated range | $1,750–$7,050 | $1,750–$7,050 |
| Labor index (vs US) | ×1.18 | ×1.18 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | None | None |
| Labor share | $2,400 | $2,400 |
| Materials/equipment | $2,000 | $2,000 |
All figures are 2026 localized planning estimates for spray foam insulation — get an actual quote before you commit.
A wash — choose on quality, not city
Neither metro has a cost edge on spray foam insulation — spend your decision-making energy on the contractor, not the location.
Spray foam insulation by type: Bellevue vs Redmond
Every spray foam insulation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Bellevue | Redmond |
|---|---|---|
| Open-cell | $1,750–$5,300 | $1,750–$5,300 |
| Closed-cell | $2,950–$8,250 | $2,950–$8,250 |
Treat these as 2026 localized estimates for spray foam insulation, not quotes from a contractor.
Spray foam insulation by area: Bellevue vs Redmond
Spray foam is priced by board foot (1 sq ft at 1 inch thick), which works out to about $1.50–$5 per sq ft of surface installed depending on foam type and thickness. Closed-cell costs more but adds twice the R-value per inch.
| Size | Bellevue | Redmond |
|---|---|---|
| 500 sq ft | $1,050–$2,800 | $1,050–$2,800 |
| 1,000 sq ft | $1,750–$4,700 | $1,750–$4,700 |
| 1,500 sq ft | $2,600–$6,450 | $2,600–$6,450 |
| 2,000+ sq ft | $3,300–$7,650 | $3,300–$7,650 |
Spray foam insulation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What insulation pros earn in each metro
With labor making up about 55% of a spray foam insulation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for spray foam insulation in either city
Everyone insulates in fall before winter, so that's the busy, full-price season. Booking in spring or summer catches off-peak pricing — and utility rebate budgets are often freshest early in the year.
How much insulation is worth paying for?
How much you spend on insulation and how fast it pays back come down to R-value, air-sealing and material. Our editors break down the trade-offs.
The air-sealing case
Insulation without air-sealing underperforms. Sealing leaks first is cheap and often delivers more comfort per dollar than thicker insulation alone — make sure it's in the scope.
The R-value case
Aim for the R-value the DOE assigns your zone, not a round number that sounds close enough. Every point you fall short is comfort you don't feel and utility savings you never bank — savings that would have covered the extra material several times over.
The rebate case
Insulation carries some of the strongest incentive money in remodeling, with utility and state rebates covering a real portion of the cost since the federal 25C credit expired at the end of 2025. Look up what applies on DSIRE, then schedule the work while rebate funds are still unclaimed for the year.
What makes insulation unusual is that the thorough version and the cheap version are the same version — seal first, meet the DOE R-value for your zone, and layer on the rebates. A partial job just pushes the payback date further out.
Bellevue vs Redmond
Is spray foam insulation cheaper in Bellevue or Redmond?
There's no meaningful difference: spray foam insulation runs about $4,400 in both places.
Why does spray foam insulation cost more in Redmond than Bellevue?
The main driver is local labor rates: Redmond's labor index is 1.18 versus 1.18 in Bellevue. Climate zone (mixed vs mixed) also shift the total.
How much is spray foam insulation in Bellevue, WA?
spray foam insulation in Bellevue runs $1,750–$7,050 as of 2026 — most jobs land near $4,400.
Do insulation pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $41.1/hr in Seattle-Tacoma-Bellevue compared with $41.1/hr in Seattle-Tacoma-Bellevue (BLS OEWS). Labor is about 55% of a spray foam insulation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy spray foam insulation — and does it differ by city?
Timing doesn't change by city here — Spring and summer is the cheapest window in both Bellevue and Redmond, saving roughly 5–10%. Avoid the pre-winter fall rush in either location, when emergency replacements push prices up.
Should I choose where to live based on spray foam insulation cost?
Cost shouldn't be the deciding factor between Bellevue and Redmond — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare spray foam insulation in other cities
Updated June 2026 · By Serhat Özçelik