Spray Foam Insulation cost: Bellevue vs Kirkland (2026)
There's essentially no price gap here: spray foam insulation runs close to $4,400 in both Bellevue and Kirkland in 2026.
Bellevue WA
Typically around $4,400
Kirkland WA
Typically around $4,400
Bellevue vs Kirkland: full breakdown
| Factor | Bellevue | Kirkland |
|---|---|---|
| Typical 2026 cost | $4,400 | $4,400 |
| Estimated range | $1,750–$7,050 | $1,750–$7,050 |
| Labor index (vs US) | ×1.18 | ×1.18 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | None | None |
| Labor share | $2,400 | $2,400 |
| Materials/equipment | $2,000 | $2,000 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national spray foam insulation range for local labor, climate and permits.
Basically a tie — focus on the contractor
With no real price gap on spray foam insulation, the choice comes down to contractor quality and timing, not which city you're in.
Spray foam insulation by type: Bellevue vs Kirkland
Every spray foam insulation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Bellevue | Kirkland |
|---|---|---|
| Open-cell | $1,750–$5,300 | $1,750–$5,300 |
| Closed-cell | $2,950–$8,250 | $2,950–$8,250 |
All figures are 2026 localized planning estimates for spray foam insulation — get an actual quote before you commit.
Spray foam insulation by area: Bellevue vs Kirkland
Spray foam is priced by board foot (1 sq ft at 1 inch thick), which works out to about $1.50–$5 per sq ft of surface installed depending on foam type and thickness. Closed-cell costs more but adds twice the R-value per inch.
| Size | Bellevue | Kirkland |
|---|---|---|
| 500 sq ft | $1,050–$2,800 | $1,050–$2,800 |
| 1,000 sq ft | $1,750–$4,700 | $1,750–$4,700 |
| 1,500 sq ft | $2,600–$6,450 | $2,600–$6,450 |
| 2,000+ sq ft | $3,300–$7,650 | $3,300–$7,650 |
Treat these as 2026 localized estimates for spray foam insulation, not quotes from a contractor.
What insulation pros earn in each metro
About 55% of a spray foam insulation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for spray foam insulation in either city
Demand for insulation spikes every fall as winter approaches, pushing prices with it. Spring and summer avoid that crowd, and utility rebate pools are frequently still fresh that early in the year.
How much insulation is worth paying for?
How much you spend on insulation and how fast it pays back come down to R-value, air-sealing and material. Our editors break down the trade-offs.
The rebate case
Few home projects come with rebate support like insulation does — utility and state programs routinely offset a meaningful slice of the bill (the federal 25C credit closed in December 2025). Run your address through DSIRE first, and book when a program's yearly budget has just refilled.
The air-sealing case
Blown-in or batt, insulation can only slow the heat that isn't already escaping through gaps and penetrations. Sealing those leaks costs little and frequently buys more comfort per dollar than piling on extra R-value, so confirm it's written into the scope.
The R-value case
Insulate to the DOE recommendation for your climate zone — under-insulating to save money leaves comfort and energy savings on the table that would have paid the job back.
Rare among home projects, insulation punishes the half-measure — the money saved by under-insulating or skipping the air-seal comes back as higher bills. Meet the DOE R-value for your zone, seal the leaks first, and use the rebates on the table.
Bellevue vs Kirkland
Is spray foam insulation cheaper in Bellevue or Kirkland?
spray foam insulation costs about the same in both — roughly $4,400 in each city.
Why does spray foam insulation cost more in Kirkland than Bellevue?
Labor rates explain most of it — 1.18 in Kirkland vs 1.18 in Bellevue. A mixed climate versus mixed accounts for the rest.
How much is spray foam insulation in Bellevue, WA?
spray foam insulation in Bellevue runs $1,750–$7,050 as of 2026 — most jobs land near $4,400.
Do insulation pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $41.1/hr in the Seattle-Tacoma-Bellevue area versus $41.1/hr around Seattle-Tacoma-Bellevue (BLS metro wage data). Since labor is roughly 55% of a spray foam insulation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy spray foam insulation — and does it differ by city?
It doesn't vary by location — Spring and summer is the discount window in both Bellevue and Kirkland (roughly 5–10% off), while the pre-winter fall rush tends to be the most expensive in either city.
Should I choose where to live based on spray foam insulation cost?
Not on this basis — Bellevue and Kirkland cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare spray foam insulation in other cities
Updated June 2026 · By Serhat Özçelik