Spray Foam Insulation cost: Beaverton vs Hillsboro (2026)
In 2026, Beaverton and Hillsboro land on nearly identical spray foam insulation pricing — about $4,000 either way.
Beaverton OR
Typically around $4,000
Hillsboro OR
Typically around $4,000
Beaverton vs Hillsboro: full breakdown
| Factor | Beaverton | Hillsboro |
|---|---|---|
| Typical 2026 cost | $4,000 | $4,000 |
| Estimated range | $1,600–$6,400 | $1,600–$6,400 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | None | None |
| Labor share | $2,200 | $2,200 |
| Materials/equipment | $1,800 | $1,800 |
Treat these as 2026 localized estimates for spray foam insulation, not quotes from a contractor.
A wash — choose on quality, not city
Neither metro has a cost edge on spray foam insulation — spend your decision-making energy on the contractor, not the location.
Spray foam insulation by type: Beaverton vs Hillsboro
Every spray foam insulation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Beaverton | Hillsboro |
|---|---|---|
| Open-cell | $1,600–$4,800 | $1,600–$4,800 |
| Closed-cell | $2,650–$7,450 | $2,650–$7,450 |
All figures are 2026 localized planning estimates for spray foam insulation — get an actual quote before you commit.
Spray foam insulation by area: Beaverton vs Hillsboro
Spray foam is priced by board foot (1 sq ft at 1 inch thick), which works out to about $1.50–$5 per sq ft of surface installed depending on foam type and thickness. Closed-cell costs more but adds twice the R-value per inch.
| Size | Beaverton | Hillsboro |
|---|---|---|
| 500 sq ft | $950–$2,550 | $950–$2,550 |
| 1,000 sq ft | $1,600–$4,250 | $1,600–$4,250 |
| 1,500 sq ft | $2,350–$5,850 | $2,350–$5,850 |
| 2,000+ sq ft | $3,000–$6,950 | $3,000–$6,950 |
These are 2026 planning figures for spray foam insulation, localized to each city — not formal quotes.
What insulation pros earn in each metro
Labor is about 55% of a spray foam insulation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for spray foam insulation in either city
Demand for insulation spikes every fall as winter approaches, pushing prices with it. Spring and summer avoid that crowd, and utility rebate pools are frequently still fresh that early in the year.
How much insulation is worth paying for?
Where an insulation budget lands depends less on square footage than on three calls — the R-value you target, whether air-sealing rides along, and which material fills the cavity.
The air-sealing case
Skip air-sealing and you're insulating around the very holes letting conditioned air leak out. Caulk, foam and weatherstripping are inexpensive and often return more felt comfort than a thicker blanket of insulation ever would — insist the crew handles the leaks before they bury them.
The rebate case
Insulation carries some of the strongest incentive money in remodeling, with utility and state rebates covering a real portion of the cost since the federal 25C credit expired at the end of 2025. Look up what applies on DSIRE, then schedule the work while rebate funds are still unclaimed for the year.
The R-value case
Aim for the R-value the DOE assigns your zone, not a round number that sounds close enough. Every point you fall short is comfort you don't feel and utility savings you never bank — savings that would have covered the extra material several times over.
Hit the DOE R-value for your zone, air-seal first, and stack the rebates. Insulation is one of the few upgrades where doing it fully is also the cheapest path to payback.
Beaverton vs Hillsboro
Is spray foam insulation cheaper in Beaverton or Hillsboro?
spray foam insulation costs about the same in both — roughly $4,000 in each city.
Why does spray foam insulation cost more in Hillsboro than Beaverton?
The main driver is local labor rates: Hillsboro's labor index is 1.07 versus 1.07 in Beaverton. Climate zone (mixed vs mixed) also shift the total.
How much is spray foam insulation in Beaverton, OR?
In Beaverton, spray foam insulation typically runs $1,600–$6,400 in 2026, with most homeowners paying around $4,000.
Do insulation pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $34.9/hr in the Portland-Vancouver-Hillsboro area versus $34.9/hr around Portland-Vancouver-Hillsboro (BLS metro wage data). Since labor is roughly 55% of a spray foam insulation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy spray foam insulation — and does it differ by city?
It doesn't vary by location — Spring and summer is the discount window in both Beaverton and Hillsboro (roughly 5–10% off), while the pre-winter fall rush tends to be the most expensive in either city.
Should I choose where to live based on spray foam insulation cost?
There's no cost argument here between Beaverton and Hillsboro — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare spray foam insulation in other cities
Updated June 2026 · By Serhat Özçelik