Spray Foam Insulation cost: Annapolis vs Baltimore (2026)
Spray foam insulation costs about the same in Annapolis and Baltimore in 2026 — roughly $3,950 in each.
Annapolis MD
Typically around $3,950
Baltimore MD
Typically around $3,950
Annapolis vs Baltimore: full breakdown
| Factor | Annapolis | Baltimore |
|---|---|---|
| Typical 2026 cost | $3,950 | $3,950 |
| Estimated range | $1,550–$6,300 | $1,550–$6,300 |
| Labor index (vs US) | ×1.05 | ×1.05 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | None | None |
| Labor share | $2,150 | $2,150 |
| Materials/equipment | $1,800 | $1,800 |
Spray foam insulation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
This is a statistical tie on spray foam insulation cost, so let contractor reputation and project timing decide, not geography.
Spray foam insulation by type: Annapolis vs Baltimore
Every spray foam insulation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Annapolis | Baltimore |
|---|---|---|
| Open-cell | $1,550–$4,700 | $1,550–$4,700 |
| Closed-cell | $2,600–$7,350 | $2,600–$7,350 |
Spray foam insulation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Spray foam insulation by area: Annapolis vs Baltimore
Spray foam is priced by board foot (1 sq ft at 1 inch thick), which works out to about $1.50–$5 per sq ft of surface installed depending on foam type and thickness. Closed-cell costs more but adds twice the R-value per inch.
| Size | Annapolis | Baltimore |
|---|---|---|
| 500 sq ft | $950–$2,500 | $950–$2,500 |
| 1,000 sq ft | $1,550–$4,200 | $1,550–$4,200 |
| 1,500 sq ft | $2,300–$5,750 | $2,300–$5,750 |
| 2,000+ sq ft | $2,950–$6,800 | $2,950–$6,800 |
Treat these as 2026 localized estimates for spray foam insulation, not quotes from a contractor.
What insulation pros earn in each metro
With labor making up about 55% of a spray foam insulation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Baltimore-Columbia-Towson metro · about 9% above the US average installer wage.
Baltimore-Columbia-Towson metro · about 9% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for spray foam insulation in either city
Because most homeowners wait for the fall pre-winter panic, that's when prices peak. Getting it done in spring or summer means less competition and, often, an untapped rebate budget.
How much insulation is worth paying for?
R-value, air-sealing and material decide both the price and the payback. Our editors on the trade-offs.
The rebate case
Insulation carries some of the strongest incentive money in remodeling, with utility and state rebates covering a real portion of the cost since the federal 25C credit expired at the end of 2025. Look up what applies on DSIRE, then schedule the work while rebate funds are still unclaimed for the year.
The air-sealing case
Blown-in or batt, insulation can only slow the heat that isn't already escaping through gaps and penetrations. Sealing those leaks costs little and frequently buys more comfort per dollar than piling on extra R-value, so confirm it's written into the scope.
The R-value case
Aim for the R-value the DOE assigns your zone, not a round number that sounds close enough. Every point you fall short is comfort you don't feel and utility savings you never bank — savings that would have covered the extra material several times over.
What makes insulation unusual is that the thorough version and the cheap version are the same version — seal first, meet the DOE R-value for your zone, and layer on the rebates. A partial job just pushes the payback date further out.
Annapolis vs Baltimore
Is spray foam insulation cheaper in Annapolis or Baltimore?
spray foam insulation costs about the same in both — roughly $3,950 in each city.
Why does spray foam insulation cost more in Baltimore than Annapolis?
Labor rates explain most of it — 1.05 in Baltimore vs 1.05 in Annapolis. A mixed climate versus mixed accounts for the rest.
How much is spray foam insulation in Annapolis, MD?
Annapolis homeowners can expect $1,550 to $6,300 for spray foam insulation in 2026, with $3,950 the typical number.
Do insulation pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $33.9/hr around Baltimore-Columbia-Towson versus $33.9/hr near Baltimore-Columbia-Towson. With labor making up about 55% of a spray foam insulation job, that difference carries straight through to the final price.
When is the cheapest time to buy spray foam insulation — and does it differ by city?
The best window is the same in both Annapolis and Baltimore: Spring and summer, when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during the pre-winter fall rush.
Should I choose where to live based on spray foam insulation cost?
There's no cost argument here between Annapolis and Baltimore — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare spray foam insulation in other cities
Updated June 2026 · By Serhat Özçelik