Sewer Line Replacement cost: Clarksville vs Murfreesboro (2026)
The two metros aren't quite in sync on sewer line replacement: Clarksville sits 2% below Murfreesboro, or roughly $7,350 versus $7,500 — about $150 apart.
Clarksville TN
Lower costTypically around $7,350
Murfreesboro TN
Typically around $7,500
Clarksville vs Murfreesboro: full breakdown
| Factor | Clarksville | Murfreesboro |
|---|---|---|
| Typical 2026 cost | $7,350 | $7,500 |
| Estimated range | $3,050–$11,600 | $3,150–$11,850 |
| Labor index (vs US) | ×0.95 | ×0.97 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $225 | $250 |
| Labor share | $4,400 | $4,500 |
| Materials/equipment | $2,950 | $3,000 |
These are 2026 planning figures for sewer line replacement, localized to each city — not formal quotes.
Is the gap worth worrying about?
A 2% difference on sewer line replacement is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Sewer line replacement by type: Clarksville vs Murfreesboro
Each sewer line replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Clarksville | Murfreesboro |
|---|---|---|
| Trenchless lining (CIPP) | $4,000–$11,600 | $4,100–$11,850 |
| Pipe bursting | $4,950–$12,500 | $5,100–$12,800 |
| Traditional excavation | $3,050–$12,500 | $3,150–$12,800 |
Treat these as 2026 localized estimates for sewer line replacement, not quotes from a contractor.
Sewer line replacement by line length: Clarksville vs Murfreesboro
Sewer replacement is priced largely by the length of line from the house to the city main, at roughly $50–$250 per foot depending on method, depth, and what's above the trench.
| Size | Clarksville | Murfreesboro |
|---|---|---|
| 25 ft (short run) | $2,100–$5,900 | $2,200–$6,050 |
| 50 ft (typical) | $3,050–$8,750 | $3,150–$8,950 |
| 75 ft | $4,500–$11,600 | $4,600–$11,850 |
| 100+ ft (long / deep run) | $5,900–$17,250 | $6,050–$17,650 |
Treat these as 2026 localized estimates for sewer line replacement, not quotes from a contractor.
What plumbing pros earn in each metro
Since labor accounts for around 60% of what a sewer line replacement job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Clarksville; we use Tennessee regional price parity instead.
Nashville-Davidson--Murfreesboro--Franklin metro · about 6% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for sewer line replacement in either city
Emergency plumbing work is priced for urgency, full stop. A repipe or sewer line, on the other hand, is a project you can schedule — and scheduling it for a slow month gets you a slightly better rate and a crew that isn't rushing.
How do you budget a major plumbing job?
There's no fixed price for a repipe or sewer job until you know the method and what's below the yard. Our editors on how to think about the scope.
The method case
Trenchless repair costs more per foot but saves your driveway, landscaping and the restoration bill. Traditional dig is cheaper upfront only if there's little to tear up and rebuild.
The diagnosis-first case
The estimate is only as honest as the inspection behind it. Push a camera down the line first and the scope becomes a documented fact — no padding for problems that aren't there, no ambush once the trench is open.
The material case
PEX is cheaper, faster and freeze-tolerant; copper costs more but lasts longer and some buyers prefer it. Match the material to your climate and how long you'll own the home.
Scope, not brand, is what sets a plumbing price. Confirm it with a camera inspection, compare trenchless against the full cost of a dig — landscaping included — and match pipe material to your climate.
Clarksville vs Murfreesboro
Is sewer line replacement cheaper in Clarksville or Murfreesboro?
In 2026, sewer line replacement is cheaper in Clarksville at about $7,350, versus $7,500 in Murfreesboro — a difference of about $150 (2%).
Why does sewer line replacement cost more in Murfreesboro than Clarksville?
The main driver is local labor rates: Murfreesboro's labor index is 0.97 versus 0.95 in Clarksville. Climate zone (mixed vs mixed) and permit fees also shift the total.
How much is sewer line replacement in Clarksville, TN?
Expect to pay $3,050 to $11,600 for sewer line replacement in Clarksville in 2026, averaging around $7,350.
When is the cheapest time to buy sewer line replacement — and does it differ by city?
Timing doesn't change by city here — Off-peak winter for planned work is the cheapest window in both Clarksville and Murfreesboro, saving roughly Around 5%. Avoid anytime it becomes an emergency in either location, when emergency replacements push prices up.
Should I choose where to live based on sewer line replacement cost?
That would be a stretch. $150 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Murfreesboro can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare sewer line replacement in other cities
Updated June 2026 · By Serhat Özçelik