Metal Roof Installation cost: Seattle vs Tacoma (2026)
Seattle and Tacoma are a near-perfect match on metal roof installation cost in 2026, both landing around $25,950.
Seattle WA
Typically around $25,950
Tacoma WA
Typically around $25,950
Seattle vs Tacoma: full breakdown
| Factor | Seattle | Tacoma |
|---|---|---|
| Typical 2026 cost | $25,950 | $25,950 |
| Estimated range | $15,800–$36,050 | $15,800–$36,050 |
| Labor index (vs US) | ×1.19 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $15,550 | $15,550 |
| Materials/equipment | $10,400 | $10,400 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Basically a tie — focus on the contractor
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Seattle vs Tacoma
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Seattle | Tacoma |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $11,050–$21,750 |
| Standing-seam steel | $21,750–$42,000 | $21,750–$42,000 |
| Aluminum | $17,000–$33,700 | $17,000–$33,700 |
| Copper | $36,050–$71,800 | $36,050–$71,800 |
| Zinc | $33,700–$65,850 | $33,700–$65,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Seattle vs Tacoma
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Seattle | Tacoma |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $9,850–$19,400 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $13,450–$27,750 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $15,800–$36,050 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $19,400–$43,200 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $22,950–$50,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Seattle vs Tacoma
Is metal roof installation cheaper in Seattle or Tacoma?
metal roof installation costs about the same in both — roughly $25,950 in each city.
Why does metal roof installation cost more in Tacoma than Seattle?
It comes down to labor: Tacoma indexes at 1.19 against Seattle's 1.19. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Seattle, WA?
In Seattle, metal roof installation typically runs $15,800–$36,050 in 2026, with most homeowners paying around $25,950.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $41.1/hr around Seattle-Tacoma-Bellevue versus $41.1/hr near Seattle-Tacoma-Bellevue. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Seattle and Tacoma: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Seattle and Tacoma. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik