Metal Roof Installation cost: Salt Lake City vs Taylorsville (2026)
There's essentially no price gap here: metal roof installation runs close to $22,250 in both Salt Lake City and Taylorsville in 2026.
Salt Lake City UT
Typically around $22,250
Taylorsville UT
Typically around $22,250
Salt Lake City vs Taylorsville: full breakdown
| Factor | Salt Lake City | Taylorsville |
|---|---|---|
| Typical 2026 cost | $22,250 | $22,250 |
| Estimated range | $13,550–$30,900 | $13,550–$30,900 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $275 |
| Labor share | $13,350 | $13,350 |
| Materials/equipment | $8,900 | $8,900 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
No real cost edge either way
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Salt Lake City vs Taylorsville
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Salt Lake City | Taylorsville |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,450–$18,650 | $9,450–$18,650 |
| Standing-seam steel | $18,650–$36,000 | $18,650–$36,000 |
| Aluminum | $14,550–$28,850 | $14,550–$28,850 |
| Copper | $30,900–$61,500 | $30,900–$61,500 |
| Zinc | $28,850–$56,400 | $28,850–$56,400 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Salt Lake City vs Taylorsville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Salt Lake City | Taylorsville |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,450–$16,600 | $8,450–$16,600 |
| 1,500 sq ft (15 squares) | $11,500–$23,750 | $11,500–$23,750 |
| 2,000 sq ft (20 squares) | $13,550–$30,900 | $13,550–$30,900 |
| 2,500 sq ft (25 squares) | $16,600–$37,000 | $16,600–$37,000 |
| 3,000+ sq ft (30 squares) | $19,650–$43,100 | $19,650–$43,100 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Salt Lake City vs Taylorsville
Is metal roof installation cheaper in Salt Lake City or Taylorsville?
There's no meaningful difference: metal roof installation runs about $22,250 in both places.
Why does metal roof installation cost more in Taylorsville than Salt Lake City?
Taylorsville's higher labor index (0.98 vs 0.98 in Salt Lake City) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is metal roof installation in Salt Lake City, UT?
In Salt Lake City, metal roof installation typically runs $13,550–$30,900 in 2026, with most homeowners paying around $22,250.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $30.1/hr in Salt Lake City-Murray compared with $30.1/hr in Salt Lake City-Murray (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Salt Lake City and Taylorsville: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Salt Lake City and Taylorsville — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik