Metal Roof Installation cost: Salt Lake City vs Sandy Hills (2026)
In 2026, Salt Lake City and Sandy Hills land on nearly identical metal roof installation pricing — about $22,250 either way.
Salt Lake City UT
Typically around $22,250
Sandy Hills UT
Typically around $22,250
Salt Lake City vs Sandy Hills: full breakdown
| Factor | Salt Lake City | Sandy Hills |
|---|---|---|
| Typical 2026 cost | $22,250 | $22,250 |
| Estimated range | $13,550–$30,900 | $13,550–$30,900 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $275 |
| Labor share | $13,350 | $13,350 |
| Materials/equipment | $8,900 | $8,900 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Basically a tie — focus on the contractor
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Salt Lake City vs Sandy Hills
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Salt Lake City | Sandy Hills |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,450–$18,650 | $9,450–$18,650 |
| Standing-seam steel | $18,650–$36,000 | $18,650–$36,000 |
| Aluminum | $14,550–$28,850 | $14,550–$28,850 |
| Copper | $30,900–$61,500 | $30,900–$61,500 |
| Zinc | $28,850–$56,400 | $28,850–$56,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Salt Lake City vs Sandy Hills
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Salt Lake City | Sandy Hills |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,450–$16,600 | $8,450–$16,600 |
| 1,500 sq ft (15 squares) | $11,500–$23,750 | $11,500–$23,750 |
| 2,000 sq ft (20 squares) | $13,550–$30,900 | $13,550–$30,900 |
| 2,500 sq ft (25 squares) | $16,600–$37,000 | $16,600–$37,000 |
| 3,000+ sq ft (30 squares) | $19,650–$43,100 | $19,650–$43,100 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Salt Lake City vs Sandy Hills
Is metal roof installation cheaper in Salt Lake City or Sandy Hills?
There's no meaningful difference: metal roof installation runs about $22,250 in both places.
Why does metal roof installation cost more in Sandy Hills than Salt Lake City?
Sandy Hills's higher labor index (0.98 vs 0.98 in Salt Lake City) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is metal roof installation in Salt Lake City, UT?
Salt Lake City homeowners can expect $13,550 to $30,900 for metal roof installation in 2026, with $22,250 the typical number.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $30.1/hr in Salt Lake City-Murray compared with $30.1/hr in Salt Lake City-Murray (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Salt Lake City and Sandy Hills (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Salt Lake City and Sandy Hills — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik