Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Provo vs Sandy (2026)

Provo runs 1% lower than Sandy for metal roof installation — expect around $22,000 in Provo against $22,250 in Sandy, a difference of about $250.

Provo UT

Lower cost
$13,400 $30,550

Typically around $22,000

Sandy UT

$13,550 $30,900

Typically around $22,250

metal roof installation runs about $250 (1%) more in Sandy than in Provo, driven mostly by local labor rates.
Side by side

Provo vs Sandy: full breakdown

FactorProvoSandy
Typical 2026 cost$22,000$22,250
Estimated range$13,400–$30,550$13,550–$30,900
Labor index (vs US)×0.97×0.98
Climate zoneColdCold
Climate factor×1.04×1.04
Local permit$275$275
Labor share$13,200$13,350
Materials/equipment$8,800$8,900

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

The verdict

Is the gap worth worrying about?

That 1% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.

By type

Metal roof installation by type: Provo vs Sandy

Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeProvoSandy
Corrugated steel (exposed fastener)$9,350$18,450$9,450$18,650
Standing-seam steel$18,450$35,600$18,650$36,000
Aluminum$14,400$28,500$14,550$28,850
Copper$30,550$60,800$30,900$61,500
Zinc$28,500$55,750$28,850$56,400

These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.

By size

Metal roof installation by roof size: Provo vs Sandy

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeProvoSandy
1,000 sq ft (10 squares)$8,350$16,400$8,450$16,600
1,500 sq ft (15 squares)$11,350$23,500$11,500$23,750
2,000 sq ft (20 squares)$13,400$30,550$13,550$30,900
2,500 sq ft (25 squares)$16,400$36,600$16,600$37,000
3,000+ sq ft (30 squares)$19,450$42,650$19,650$43,100

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

Local labor reality

What roofing pros earn in each metro

About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.

Provo, UT
Modeled from state data

No BLS metro wage series for Provo; we use Utah regional price parity instead.

Sandy, UT
$30.1/hr

Salt Lake City-Murray metro · about 3% below the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for metal roof installation in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Provo vs Sandy

Is metal roof installation cheaper in Provo or Sandy?

Provo wins on price: metal roof installation runs about $22,000 there versus $22,250 in Sandy, a gap of roughly $250 (1%) as of 2026.

Why does metal roof installation cost more in Sandy than Provo?

The main driver is local labor rates: Sandy's labor index is 0.98 versus 0.97 in Provo. Climate zone (cold vs cold) also shift the total.

How much is metal roof installation in Provo, UT?

metal roof installation in Provo runs $13,400–$30,550 as of 2026 — most jobs land near $22,000.

When is the cheapest time to buy metal roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Provo and Sandy (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on metal roof installation cost?

Rarely. The $250 difference is real but one-time, and you can often close most of it in Sandy by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik