Metal Roof Installation cost: New Orleans vs Shreveport (2026)
In 2026, metal roof installation is about 3% more expensive in New Orleans than in Shreveport. Most homeowners pay around $21,650 in New Orleans versus $20,950 in Shreveport — a gap of roughly $700.
New Orleans LA
Typically around $21,650
Shreveport LA
Lower costTypically around $20,950
New Orleans vs Shreveport: full breakdown
| Factor | New Orleans | Shreveport |
|---|---|---|
| Typical 2026 cost | $21,650 | $20,950 |
| Estimated range | $13,200–$30,050 | $12,750–$29,100 |
| Labor index (vs US) | ×0.96 | ×0.93 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $250 |
| Labor share | $13,000 | $12,550 |
| Materials/equipment | $8,650 | $8,400 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
At 3%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: New Orleans vs Shreveport
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | New Orleans | Shreveport |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,200–$18,150 | $8,900–$17,550 |
| Standing-seam steel | $18,150–$35,050 | $17,550–$33,900 |
| Aluminum | $14,200–$28,100 | $13,700–$27,200 |
| Copper | $30,050–$59,850 | $29,100–$57,950 |
| Zinc | $28,100–$54,900 | $27,200–$53,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: New Orleans vs Shreveport
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | New Orleans | Shreveport |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,150 | $7,950–$15,650 |
| 1,500 sq ft (15 squares) | $11,200–$23,100 | $10,850–$22,400 |
| 2,000 sq ft (20 squares) | $13,200–$30,050 | $12,750–$29,100 |
| 2,500 sq ft (25 squares) | $16,150–$36,000 | $15,650–$34,900 |
| 3,000+ sq ft (30 squares) | $19,150–$42,000 | $18,550–$40,650 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
New Orleans vs Shreveport
Is metal roof installation cheaper in New Orleans or Shreveport?
Shreveport wins on price: metal roof installation runs about $20,950 there versus $21,650 in New Orleans, a gap of roughly $700 (3%) as of 2026.
Why does metal roof installation cost more in New Orleans than Shreveport?
The main driver is local labor rates: New Orleans's labor index is 0.96 versus 0.93 in Shreveport. Climate zone (hot vs hot) and permit fees also shift the total.
How much is metal roof installation in New Orleans, LA?
metal roof installation in New Orleans runs $13,200–$30,050 as of 2026 — most jobs land near $21,650.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in New Orleans and Shreveport: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $700 is a real gap, but it's a one-time cost you can partly offset in New Orleans with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik