Metal Roof Installation cost: Mount Laurel vs Paterson (2026)
In 2026, metal roof installation is about 9% less expensive in Mount Laurel than in Paterson. Most homeowners pay around $22,700 in Mount Laurel versus $24,850 in Paterson — a gap of roughly $2,150.
Mount Laurel NJ
Lower costTypically around $22,700
Paterson NJ
Typically around $24,850
Mount Laurel vs Paterson: full breakdown
| Factor | Mount Laurel | Paterson |
|---|---|---|
| Typical 2026 cost | $22,700 | $24,850 |
| Estimated range | $13,850–$31,550 | $15,150–$34,500 |
| Labor index (vs US) | ×1.04 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $325 |
| Labor share | $13,600 | $14,900 |
| Materials/equipment | $9,100 | $9,950 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
That's a real $2,150 difference (9%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Paterson can narrow it.
Metal roof installation by type: Mount Laurel vs Paterson
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Mount Laurel | Paterson |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,650–$19,050 | $10,550–$20,800 |
| Standing-seam steel | $19,050–$36,800 | $20,800–$40,200 |
| Aluminum | $14,900–$29,500 | $16,250–$32,200 |
| Copper | $31,550–$62,850 | $34,500–$68,650 |
| Zinc | $29,500–$57,650 | $32,200–$62,950 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Mount Laurel vs Paterson
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Mount Laurel | Paterson |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,600–$16,950 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $11,750–$24,250 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $13,850–$31,550 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $16,950–$37,850 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $20,100–$44,100 | $21,950–$48,150 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Philadelphia-Camden-Wilmington metro · about 7% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Mount Laurel vs Paterson
Is metal roof installation cheaper in Mount Laurel or Paterson?
Yes — Paterson costs more. Expect around $24,850 for metal roof installation there against $22,700 in Mount Laurel, about $2,150 (9%) apart in 2026.
Why does metal roof installation cost more in Paterson than Mount Laurel?
Labor rates explain most of it — 1.14 in Paterson vs 1.04 in Mount Laurel. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Mount Laurel, NJ?
Mount Laurel homeowners can expect $13,850 to $31,550 for metal roof installation in 2026, with $22,700 the typical number.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $33.4/hr around Philadelphia-Camden-Wilmington versus $38.3/hr near New York-Newark-Jersey City. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Mount Laurel and Paterson: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $2,150 is a real gap, but it's a one-time cost you can partly offset in Paterson with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik