Metal Roof Installation cost: Minneapolis vs St. Cloud (2026)
Minneapolis runs 16% higher than St. Cloud for metal roof installation — expect around $25,050 in Minneapolis against $21,550 in St. Cloud, a difference of about $3,500.
Minneapolis MN
Typically around $25,050
St. Cloud MN
Lower costTypically around $21,550
Minneapolis vs St. Cloud: full breakdown
| Factor | Minneapolis | St. Cloud |
|---|---|---|
| Typical 2026 cost | $25,050 | $21,550 |
| Estimated range | $15,250–$34,850 | $13,100–$29,950 |
| Labor index (vs US) | ×1.11 | ×0.95 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $250 |
| Labor share | $15,050 | $12,950 |
| Materials/equipment | $10,000 | $8,600 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the price difference a dealbreaker?
A 16% spread (roughly $3,500) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Minneapolis typically recover some of it.
Metal roof installation by type: Minneapolis vs St. Cloud
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Minneapolis | St. Cloud |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,650–$21,000 | $9,150–$18,050 |
| Standing-seam steel | $21,000–$40,600 | $18,050–$34,900 |
| Aluminum | $16,400–$32,550 | $14,100–$27,950 |
| Copper | $34,850–$69,350 | $29,950–$59,650 |
| Zinc | $32,550–$63,600 | $27,950–$54,700 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Minneapolis vs St. Cloud
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Minneapolis | St. Cloud |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,500–$18,700 | $8,150–$16,100 |
| 1,500 sq ft (15 squares) | $12,950–$26,750 | $11,150–$23,000 |
| 2,000 sq ft (20 squares) | $15,250–$34,850 | $13,100–$29,950 |
| 2,500 sq ft (25 squares) | $18,700–$41,750 | $16,100–$35,900 |
| 3,000+ sq ft (30 squares) | $22,150–$48,650 | $19,050–$41,850 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Minneapolis-St. Paul-Bloomington metro · about 18% above the US average installer wage.
No BLS metro wage series for St. Cloud; we use Minnesota regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Minneapolis vs St. Cloud
Is metal roof installation cheaper in Minneapolis or St. Cloud?
Yes — Minneapolis costs more. Expect around $25,050 for metal roof installation there against $21,550 in St. Cloud, about $3,500 (16%) apart in 2026.
Why does metal roof installation cost more in Minneapolis than St. Cloud?
It comes down to labor: Minneapolis indexes at 1.11 against St. Cloud's 0.95. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Minneapolis, MN?
Expect to pay $15,250 to $34,850 for metal roof installation in Minneapolis in 2026, averaging around $25,050.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Minneapolis and St. Cloud (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $3,500 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Minneapolis can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik