Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Millcreek vs Provo (2026)

Budget-wise, metal roof installation in Millcreek ($22,250) runs 1% more than in Provo ($22,000), a roughly $250 spread.

Millcreek UT

$13,550 $30,900

Typically around $22,250

Provo UT

Lower cost
$13,400 $30,550

Typically around $22,000

Millcreek costs about $250 (1%) more than Provo for metal roof installation, largely because of the local labor rate gap.
Side by side

Millcreek vs Provo: full breakdown

FactorMillcreekProvo
Typical 2026 cost$22,250$22,000
Estimated range$13,550–$30,900$13,400–$30,550
Labor index (vs US)×0.98×0.97
Climate zoneColdCold
Climate factor×1.04×1.04
Local permit$275$275
Labor share$13,350$13,200
Materials/equipment$8,900$8,800

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

The verdict

How much should this gap actually matter?

1% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.

By type

Metal roof installation by type: Millcreek vs Provo

Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.

TypeMillcreekProvo
Corrugated steel (exposed fastener)$9,450$18,650$9,350$18,450
Standing-seam steel$18,650$36,000$18,450$35,600
Aluminum$14,550$28,850$14,400$28,500
Copper$30,900$61,500$30,550$60,800
Zinc$28,850$56,400$28,500$55,750

All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.

By size

Metal roof installation by roof size: Millcreek vs Provo

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeMillcreekProvo
1,000 sq ft (10 squares)$8,450$16,600$8,350$16,400
1,500 sq ft (15 squares)$11,500$23,750$11,350$23,500
2,000 sq ft (20 squares)$13,550$30,900$13,400$30,550
2,500 sq ft (25 squares)$16,600$37,000$16,400$36,600
3,000+ sq ft (30 squares)$19,650$43,100$19,450$42,650

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

Local labor reality

What roofing pros earn in each metro

Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.

Millcreek, UT
$30.1/hr

Salt Lake City-Murray metro · about 3% below the US average installer wage.

Provo, UT
Modeled from state data

No BLS metro wage series for Provo; we use Utah regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for metal roof installation in either city

Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

Our take

Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.

FAQ

Millcreek vs Provo

Is metal roof installation cheaper in Millcreek or Provo?

Provo comes out ahead here, at roughly $22,000 for metal roof installation compared with $22,250 in Millcreek — a 1% ($250) gap as of 2026.

Why does metal roof installation cost more in Millcreek than Provo?

It comes down to labor: Millcreek indexes at 0.98 against Provo's 0.97. The cold-vs-cold climate difference adds to the gap.

How much is metal roof installation in Millcreek, UT?

In Millcreek, metal roof installation typically runs $13,550–$30,900 in 2026, with most homeowners paying around $22,250.

When is the cheapest time to buy metal roof installation — and does it differ by city?

Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Millcreek and Provo, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.

Should I choose where to live based on metal roof installation cost?

Probably not. Yes, $250 is a real gap, but it's a one-time cost you can partly offset in Millcreek with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik