Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Metairie Terrace vs Shreveport (2026)

The two metros aren't quite in sync on metal roof installation: Metairie Terrace sits 3% above Shreveport, or roughly $21,650 versus $20,950 — about $700 apart.

Metairie Terrace LA

$13,200 $30,050

Typically around $21,650

Shreveport LA

Lower cost
$12,750 $29,100

Typically around $20,950

metal roof installation runs about $700 (3%) more in Metairie Terrace than in Shreveport, driven mostly by local labor rates.
Side by side

Metairie Terrace vs Shreveport: full breakdown

FactorMetairie TerraceShreveport
Typical 2026 cost$21,650$20,950
Estimated range$13,200–$30,050$12,750–$29,100
Labor index (vs US)×0.96×0.93
Climate zoneHotHot
Climate factor×1.03×1.03
Local permit$275$250
Labor share$13,000$12,550
Materials/equipment$8,650$8,400

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

The verdict

Is the price difference a dealbreaker?

At 3%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.

By type

Metal roof installation by type: Metairie Terrace vs Shreveport

Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.

TypeMetairie TerraceShreveport
Corrugated steel (exposed fastener)$9,200$18,150$8,900$17,550
Standing-seam steel$18,150$35,050$17,550$33,900
Aluminum$14,200$28,100$13,700$27,200
Copper$30,050$59,850$29,100$57,950
Zinc$28,100$54,900$27,200$53,150

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

By size

Metal roof installation by roof size: Metairie Terrace vs Shreveport

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeMetairie TerraceShreveport
1,000 sq ft (10 squares)$8,200$16,150$7,950$15,650
1,500 sq ft (15 squares)$11,200$23,100$10,850$22,400
2,000 sq ft (20 squares)$13,200$30,050$12,750$29,100
2,500 sq ft (25 squares)$16,150$36,000$15,650$34,900
3,000+ sq ft (30 squares)$19,150$42,000$18,550$40,650

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Best time to buy

Cheapest time for metal roof installation in either city

Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

Our take

Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.

FAQ

Metairie Terrace vs Shreveport

Is metal roof installation cheaper in Metairie Terrace or Shreveport?

Shreveport wins on price: metal roof installation runs about $20,950 there versus $21,650 in Metairie Terrace, a gap of roughly $700 (3%) as of 2026.

Why does metal roof installation cost more in Metairie Terrace than Shreveport?

Metairie Terrace's higher labor index (0.96 vs 0.93 in Shreveport) is the biggest factor, with the hot/hot climate split and permit fee differences playing a smaller role.

How much is metal roof installation in Metairie Terrace, LA?

Metairie Terrace homeowners can expect $13,200 to $30,050 for metal roof installation in 2026, with $21,650 the typical number.

When is the cheapest time to buy metal roof installation — and does it differ by city?

The best window is the same in both Metairie Terrace and Shreveport: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on metal roof installation cost?

Rarely. The $700 difference is real but one-time, and you can often close most of it in Metairie Terrace by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik