Metal Roof Installation cost: Los Angeles vs Sherman Oaks (2026)
Los Angeles and Sherman Oaks are a near-perfect match on metal roof installation cost in 2026, both landing around $23,800.
Los Angeles CA
Typically around $23,800
Sherman Oaks CA
Typically around $23,800
Los Angeles vs Sherman Oaks: full breakdown
| Factor | Los Angeles | Sherman Oaks |
|---|---|---|
| Typical 2026 cost | $23,800 | $23,800 |
| Estimated range | $14,500–$33,050 | $14,500–$33,050 |
| Labor index (vs US) | ×1.09 | ×1.09 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,300 | $14,300 |
| Materials/equipment | $9,500 | $9,500 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
No real cost edge either way
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Los Angeles vs Sherman Oaks
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Los Angeles | Sherman Oaks |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,150–$19,950 | $10,150–$19,950 |
| Standing-seam steel | $19,950–$38,500 | $19,950–$38,500 |
| Aluminum | $15,600–$30,900 | $15,600–$30,900 |
| Copper | $33,050–$65,800 | $33,050–$65,800 |
| Zinc | $30,900–$60,350 | $30,900–$60,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Los Angeles vs Sherman Oaks
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Los Angeles | Sherman Oaks |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,050–$17,800 | $9,050–$17,800 |
| 1,500 sq ft (15 squares) | $12,350–$25,400 | $12,350–$25,400 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $14,500–$33,050 |
| 2,500 sq ft (25 squares) | $17,800–$39,600 | $17,800–$39,600 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $21,050–$46,150 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Los Angeles vs Sherman Oaks
Is metal roof installation cheaper in Los Angeles or Sherman Oaks?
Not really — both cities land at almost the same number for metal roof installation, around $23,800 each.
Why does metal roof installation cost more in Sherman Oaks than Los Angeles?
Labor rates explain most of it — 1.09 in Sherman Oaks vs 1.09 in Los Angeles. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Los Angeles, CA?
Los Angeles homeowners can expect $14,500 to $33,050 for metal roof installation in 2026, with $23,800 the typical number.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $35.9/hr in Los Angeles-Long Beach-Anaheim compared with $35.9/hr in Los Angeles-Long Beach-Anaheim (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Los Angeles and Sherman Oaks, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
There's no cost argument here between Los Angeles and Sherman Oaks — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik