Metal Roof Installation cost: Los Angeles vs San Pedro (2026)
In 2026, Los Angeles and San Pedro land on nearly identical metal roof installation pricing — about $23,800 either way.
Los Angeles CA
Typically around $23,800
San Pedro CA
Typically around $23,800
Los Angeles vs San Pedro: full breakdown
| Factor | Los Angeles | San Pedro |
|---|---|---|
| Typical 2026 cost | $23,800 | $23,800 |
| Estimated range | $14,500–$33,050 | $14,500–$33,050 |
| Labor index (vs US) | ×1.09 | ×1.09 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,300 | $14,300 |
| Materials/equipment | $9,500 | $9,500 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Los Angeles vs San Pedro
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Los Angeles | San Pedro |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,150–$19,950 | $10,150–$19,950 |
| Standing-seam steel | $19,950–$38,500 | $19,950–$38,500 |
| Aluminum | $15,600–$30,900 | $15,600–$30,900 |
| Copper | $33,050–$65,800 | $33,050–$65,800 |
| Zinc | $30,900–$60,350 | $30,900–$60,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Los Angeles vs San Pedro
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Los Angeles | San Pedro |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,050–$17,800 | $9,050–$17,800 |
| 1,500 sq ft (15 squares) | $12,350–$25,400 | $12,350–$25,400 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $14,500–$33,050 |
| 2,500 sq ft (25 squares) | $17,800–$39,600 | $17,800–$39,600 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $21,050–$46,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Los Angeles vs San Pedro
Is metal roof installation cheaper in Los Angeles or San Pedro?
metal roof installation costs about the same in both — roughly $23,800 in each city.
Why does metal roof installation cost more in San Pedro than Los Angeles?
Labor rates explain most of it — 1.09 in San Pedro vs 1.09 in Los Angeles. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Los Angeles, CA?
In Los Angeles, metal roof installation typically runs $14,500–$33,050 in 2026, with most homeowners paying around $23,800.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $35.9/hr in the Los Angeles-Long Beach-Anaheim area versus $35.9/hr around Los Angeles-Long Beach-Anaheim (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Los Angeles and San Pedro (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Los Angeles and San Pedro — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik