Metal Roof Installation cost: Kensington vs Queens (2026)
There's essentially no price gap here: metal roof installation runs close to $25,800 in both Kensington and Queens in 2026.
Kensington NY
Typically around $25,800
Queens NY
Typically around $25,800
Kensington vs Queens: full breakdown
| Factor | Kensington | Queens |
|---|---|---|
| Typical 2026 cost | $25,800 | $25,800 |
| Estimated range | $15,700–$35,850 | $15,700–$35,850 |
| Labor index (vs US) | ×1.14 | ×1.14 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $325 | $325 |
| Labor share | $15,500 | $15,500 |
| Materials/equipment | $10,300 | $10,300 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
A wash — choose on quality, not city
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Kensington vs Queens
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Kensington | Queens |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,000–$21,650 | $11,000–$21,650 |
| Standing-seam steel | $21,650–$41,750 | $21,650–$41,750 |
| Aluminum | $16,900–$33,500 | $16,900–$33,500 |
| Copper | $35,850–$71,350 | $35,850–$71,350 |
| Zinc | $33,500–$65,450 | $33,500–$65,450 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Kensington vs Queens
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Kensington | Queens |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,800–$19,250 | $9,800–$19,250 |
| 1,500 sq ft (15 squares) | $13,350–$27,550 | $13,350–$27,550 |
| 2,000 sq ft (20 squares) | $15,700–$35,850 | $15,700–$35,850 |
| 2,500 sq ft (25 squares) | $19,250–$42,950 | $19,250–$42,950 |
| 3,000+ sq ft (30 squares) | $22,800–$50,050 | $22,800–$50,050 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Kensington vs Queens
Is metal roof installation cheaper in Kensington or Queens?
Not really — both cities land at almost the same number for metal roof installation, around $25,800 each.
Why does metal roof installation cost more in Queens than Kensington?
The main driver is local labor rates: Queens's labor index is 1.14 versus 1.14 in Kensington. Climate zone (cold vs cold) also shift the total.
How much is metal roof installation in Kensington, NY?
In Kensington, metal roof installation typically runs $15,700–$35,850 in 2026, with most homeowners paying around $25,800.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $38.3/hr in the New York-Newark-Jersey City area versus $38.3/hr around New York-Newark-Jersey City (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Kensington and Queens (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Kensington and Queens cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik