Metal Roof Installation cost: Jersey City vs Lakewood (2026)
The two metros aren't quite in sync on metal roof installation: Jersey City sits 13% above Lakewood, or roughly $24,850 versus $21,900 — about $2,950 apart.
Jersey City NJ
Typically around $24,850
Lakewood NJ
Lower costTypically around $21,900
Jersey City vs Lakewood: full breakdown
| Factor | Jersey City | Lakewood |
|---|---|---|
| Typical 2026 cost | $24,850 | $21,900 |
| Estimated range | $15,150–$34,500 | $13,350–$30,450 |
| Labor index (vs US) | ×1.14 | ×1.01 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $275 |
| Labor share | $14,900 | $13,150 |
| Materials/equipment | $9,950 | $8,750 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
How much should this gap actually matter?
A 13% gap is meaningful on a project this size — about $2,950. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Jersey City.
Metal roof installation by type: Jersey City vs Lakewood
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Jersey City | Lakewood |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,550–$20,800 | $9,350–$18,400 |
| Standing-seam steel | $20,800–$40,200 | $18,400–$35,500 |
| Aluminum | $16,250–$32,200 | $14,350–$28,450 |
| Copper | $34,500–$68,650 | $30,450–$60,650 |
| Zinc | $32,200–$62,950 | $28,450–$55,600 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Jersey City vs Lakewood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jersey City | Lakewood |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,450–$18,550 | $8,300–$16,350 |
| 1,500 sq ft (15 squares) | $12,850–$26,500 | $11,350–$23,400 |
| 2,000 sq ft (20 squares) | $15,150–$34,500 | $13,350–$30,450 |
| 2,500 sq ft (25 squares) | $18,550–$41,300 | $16,350–$36,500 |
| 3,000+ sq ft (30 squares) | $21,950–$48,150 | $19,400–$42,550 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
No BLS metro wage series for Lakewood; we use New Jersey regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Jersey City vs Lakewood
Is metal roof installation cheaper in Jersey City or Lakewood?
Yes — Jersey City costs more. Expect around $24,850 for metal roof installation there against $21,900 in Lakewood, about $2,950 (13%) apart in 2026.
Why does metal roof installation cost more in Jersey City than Lakewood?
The main driver is local labor rates: Jersey City's labor index is 1.14 versus 1.01 in Lakewood. Climate zone (mixed vs mixed) and permit fees also shift the total.
How much is metal roof installation in Jersey City, NJ?
Jersey City homeowners can expect $15,150 to $34,500 for metal roof installation in 2026, with $24,850 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Jersey City and Lakewood (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $2,950 difference is real but one-time, and you can often close most of it in Jersey City by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik