Metal Roof Installation cost: Jackson vs Paterson (2026)
The two metros aren't quite in sync on metal roof installation: Jackson sits 9% below Paterson, or roughly $22,700 versus $24,850 — about $2,150 apart.
Jackson NJ
Lower costTypically around $22,700
Paterson NJ
Typically around $24,850
Jackson vs Paterson: full breakdown
| Factor | Jackson | Paterson |
|---|---|---|
| Typical 2026 cost | $22,700 | $24,850 |
| Estimated range | $13,850–$31,550 | $15,150–$34,500 |
| Labor index (vs US) | ×1.04 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $325 |
| Labor share | $13,600 | $14,900 |
| Materials/equipment | $9,100 | $9,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
How much should this gap actually matter?
That's a real $2,150 difference (9%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Paterson can narrow it.
Metal roof installation by type: Jackson vs Paterson
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Jackson | Paterson |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,650–$19,050 | $10,550–$20,800 |
| Standing-seam steel | $19,050–$36,800 | $20,800–$40,200 |
| Aluminum | $14,900–$29,500 | $16,250–$32,200 |
| Copper | $31,550–$62,850 | $34,500–$68,650 |
| Zinc | $29,500–$57,650 | $32,200–$62,950 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Metal roof installation by roof size: Jackson vs Paterson
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Jackson | Paterson |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,600–$16,950 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $11,750–$24,250 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $13,850–$31,550 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $16,950–$37,850 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $20,100–$44,100 | $21,950–$48,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Philadelphia-Camden-Wilmington metro · about 7% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Jackson vs Paterson
Is metal roof installation cheaper in Jackson or Paterson?
Yes — Paterson costs more. Expect around $24,850 for metal roof installation there against $22,700 in Jackson, about $2,150 (9%) apart in 2026.
Why does metal roof installation cost more in Paterson than Jackson?
It comes down to labor: Paterson indexes at 1.14 against Jackson's 1.04. The mixed-vs-mixed climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Jackson, NJ?
In Jackson, metal roof installation typically runs $13,850–$31,550 in 2026, with most homeowners paying around $22,700.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $33.4/hr in the Philadelphia-Camden-Wilmington area and $38.3/hr in New York-Newark-Jersey City. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Jackson and Paterson: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Rarely. The $2,150 difference is real but one-time, and you can often close most of it in Paterson by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik