Metal Roof Installation cost: Houston vs Schertz (2026)
In 2026, metal roof installation is about 1% more expensive in Houston than in Schertz. Most homeowners pay around $21,500 in Houston versus $21,250 in Schertz — a gap of roughly $250.
Houston TX
Typically around $21,500
Schertz TX
Lower costTypically around $21,250
Houston vs Schertz: full breakdown
| Factor | Houston | Schertz |
|---|---|---|
| Typical 2026 cost | $21,500 | $21,250 |
| Estimated range | $13,100–$29,900 | $12,950–$29,550 |
| Labor index (vs US) | ×0.96 | ×0.95 |
| Climate zone | Hot | Hot |
| Climate factor | ×1.03 | ×1.03 |
| Local permit | $275 | $275 |
| Labor share | $12,900 | $12,750 |
| Materials/equipment | $8,600 | $8,500 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
At 1%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Houston vs Schertz
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Houston | Schertz |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,150–$18,050 | $9,050–$17,850 |
| Standing-seam steel | $18,050–$34,850 | $17,850–$34,450 |
| Aluminum | $14,100–$27,950 | $13,950–$27,600 |
| Copper | $29,900–$59,550 | $29,550–$58,850 |
| Zinc | $27,950–$54,600 | $27,600–$53,950 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Houston vs Schertz
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Houston | Schertz |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,200–$16,100 | $8,100–$15,900 |
| 1,500 sq ft (15 squares) | $11,150–$23,000 | $11,000–$22,750 |
| 2,000 sq ft (20 squares) | $13,100–$29,900 | $12,950–$29,550 |
| 2,500 sq ft (25 squares) | $16,100–$35,850 | $15,900–$35,400 |
| 3,000+ sq ft (30 squares) | $19,050–$41,750 | $18,800–$41,300 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Houston-Pasadena-The Woodlands metro · about 7% below the US average installer wage.
San Antonio-New Braunfels metro · about 9% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Houston vs Schertz
Is metal roof installation cheaper in Houston or Schertz?
Schertz comes out ahead here, at roughly $21,250 for metal roof installation compared with $21,500 in Houston — a 1% ($250) gap as of 2026.
Why does metal roof installation cost more in Houston than Schertz?
The main driver is local labor rates: Houston's labor index is 0.96 versus 0.95 in Schertz. Climate zone (hot vs hot) also shift the total.
How much is metal roof installation in Houston, TX?
metal roof installation in Houston runs $13,100–$29,900 as of 2026 — most jobs land near $21,500.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $29/hr in the Houston-Pasadena-The Woodlands area and $28.4/hr in San Antonio-New Braunfels. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Houston and Schertz: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Rarely. The $250 difference is real but one-time, and you can often close most of it in Houston by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik